Linear Drainage Channel

Material: SMC resin glass fiber

Bowl sizes: U100/U150/U200/U250/U300

Sink Length: One-meter section

Matching Cover Plate: Stainless Steel Cover, with side seam, center seam, and double drainage; Cover Material: 201/304 Stainless Steel

1) Linear Drainage Channel

2) No bricklaying required, easy installation; can install 100 meters in a day. U-shaped drainage quick, no waterlogging, no need for slope; long lifespan and durable.

3) Smooth surface with an artistic appearance, easy to maintain and care for.

4) Material is environmentally friendly, has no adverse effects on the environment, and belongs to green and environmentally friendly materials.

5) Acid and alkali resistant, corrosion-proof, with bending and compressive strength 2-3 times that of cement products, freeze-thaw resistant, permeation-resistant, long lifespan, smooth surface, and maintenance-free.

Application Range: Shopping Malls, Residential Areas, Pedestrian Walkways, Kitchens, Home Use, Landscape Decoration Projects

Our company offers a complete range of resin finished gap drainage channels, with the size list as follows:

Contractors and design firms can select the required size based on the drainage capacity.

Sizes vary widely; please call for details; custom orders supported.

Product Showcase:

Factory Showcase:

How to Install Linear Drainage Channels:

1. Determine the trench excavation dimensions

The trench excavation dimensions are determined based on the finished trench's outer diameter and load-bearing requirements. The higher the load-bearing grade, the thicker the concrete required at the S and H positions.

2. Concrete structures

The concrete structure in Section H, based on load-bearing requirements: for low load-bearing requirements, a 30-50mm thick cushion layer can be directly applied, with bricks added on top. If conditions do not meet the requirements, concrete can be used directly. For Section S, the thickness of 30-50mm is determined specifically according to the on-site geographical environment. When the load-bearing grade reaches E600-F900 (suitable for heavy trucks), Section H requires 8mm rebar to form a 15cm x 15cm grid structure for reinforcement, with Section S to be no less than 100mm.

3. Manhole arrangement

The sinks are designed with male and female slots (one protruding and one concave) for direct assembly, with the seam treatment varying according to the specific environmental conditions.

A. Indoor: Generally requires waterproofing treatment, apply a layer of waterproofing at positions S and H, and seal the sink joints with adhesive (waterproof adhesive, marble adhesive, structural adhesive, etc. are all acceptable).

B. Outdoor: Generally not treated; directly assembled, seams not treated, especially for large projects

C. If the wastewater is polluted, it requires waterproof treatment to prevent leakage.

4. Linear Cover Installation:

A. The linear cover is directly placed over the sink. The square tube at the bottom of the cover is locked into the槽 in the middle of the sink without any preparation. Simply cover it. If stone covering is required on top of the cover,砂浆 or adhesive should be applied between the stone and the cover. The砂浆 is recommended to be no less than 3mm thick, depending on the stone's thickness; thicker stone requires thicker砂浆. Adjustments should be made according to the on-site construction.

B. The position of the gap should be as low as possible, around 3 millimeters, to facilitate drainage, and the height should not exceed the finished surface height of the ground.