Technical Advantages of Frozen Deburring Machine
The FD-1200RD Eco-efficient Automatic Flash Removal Machine is a high-efficiency, eco-friendly model specifically designed for various injection-molded products like BMC, phenolic, and resin. It utilizes eco-friendly rubber belts for circular operation, ensuring high efficiency and minimal wear. With a high-power projector and wide coverage area, the particles are evenly dispersed. It boasts a high degree of automation and a broad adjustment range, making it suitable for processing a variety of shapes.
For intricate inner wall locations where handcrafting is impractical and traffic flow is poor, especially for the burrs along the intersecting holes, electrolytic polishing offers significant advantages. Electrolytic polishing achieves higher edge uniformity and excellent process performance in edge processing, with electrolytic deburring equipment demonstrating exceptional burr removal, reliability, and efficiency. Compared to traditional handcrafting, efficiency can be increased by 10 times or more.
Technical Advantages of Frozen Deburring Machine:
No electrical grade loss during the production process. Products of unlimited quantity can be repeatedly manufactured using a single electrical grade.
No internal stress on the product parts after processing. Does not harm the current characteristics of the product parts. The frozen deburring machine factory tips that it is unlikely to cause external economic gaps. Increases the service life of the product parts.
Does not cause an air oxidation layer. No production processing required after product parts are used; no mechanical stress on the parts during processing. Capable of processing thin-walled components.
The process performance of the electrical grade is reproducible. The surface roughness reaches Ra0.05μm, and the cold trimming edge production can achieve a precision of 1-10μm.
Maintenance and care methods for the frozen deburring equipment
After customers purchase a frozen deburring machine, the following steps outline how to maintain and care for the equipment:
Maintenance and care methods for frozen deburring equipment
1. Always wear protective gear when on the job, and never work alone.
2. Inspect the airtightness of the ventilation ducts and the ball-blasting wheel door. For the first five minutes of operation, the industrial dust removal equipment must be activated. If the industrial dust removal equipment is ineffective, it is strictly prohibited to use the ball-blasting wheel.
3. The air compressor valve should open gradually; the standard pressure must not exceed 0.8 MPa.
4. The particle size distribution of the spray ball should be consistent with the working standard.
5. During the operation of the shot blasting wheel, unauthorized personnel are strictly prohibited from approaching. When cleaning and adjusting the operating position, the machine should be shut down.
6. After completing work, check and turn off the power switches of the machinery and equipment. Maintain a monthly inspection and cleaning of the machinery and equipment after each work session.
