One factor affecting the cutting accuracy and lifespan of a separator is the assembly adjustment, much like the meshing between threads. Without proper fit, it's easy for the threads to slip. The adjustment of the separator is similar; the factory-produced separator is a precision machined component, carefully assembled and adjusted. Inappropriate adjustments can affect cutting accuracy, resulting in shocks, noise, and damage to the separator, preventing it from reaching the expected rotational speed and load-bearing capacity. Therefore, suitable and accurate adjustments are crucial.

Adjustment of Axle Spacing:

If the separator experiences wear over time, causing a gap in the positioning work area, this gap can be eliminated by adjusting the spacing between the shafts. This can be achieved by synchronously adjusting the eccentric sleeves at both ends of the input shaft.

2. Adjustment of Input and Output Axial Positions:

Axial positioning of the cam splitter can be adjusted by either adjusting the lock nuts on either side of the cam or the bearing covers on either side of the input shaft. The axial position of the splitter wheel may also be adjusted by modifying the bearing covers at the ends of the output shaft or the lock nuts at the rear. Proper adjustment ensures the longevity of the cam splitter. For detailed inquiries, please consult the technical staff at Kunshan Dongzhishao.