Ceramic Fiber PaperFlexible and bendable, it is an ideal energy-saving material for kilns, pipelines, and other insulation equipment. However, to become such a material, it is essential to ensure that its quality meets the standards; otherwise, it cannot be used in these industries. So, next, let's delve into the quality specifications of this product together.
After the aluminum silicate masonry is completed, stop once for surface finishing. Flatten uneven areas with pressure plates, and for larger gaps, cut ceramic fiber paper brick pieces to trim and achieve a smooth and tight surface.
2. The lining thickness must meet the requirements.
3. After measuring the length and width, mark nine measurement points according to the diagram. Gently place the circular disk of the needle-type thickness gauge on the sample, aligning the disk hole with the measurement points. Position the indicator needle downward, carefully inserting it into the disk hole. When the needle tip touches the sample, gently press the indicator to allow the needle tip to pass through the sample and touch the glass plate, then read the thickness.
4. Stop trial laying before ceramic fiber paper installation. The separation layer should be firmly adhered, and gaps should be staggered.
This concludes the detailed introduction to the quality specifications of ceramic fiber paper. From the above content, it is clear that great attention must be paid to these aspects during installation. Therefore, to better ensure the quality and usage of the board, it is essential to use it strictly following the correct method and steps.
