1. Magnetic phase switching for power on and off communication.
2. Universal TypeFluorescent Magnetic Particle Inspection MachineNon-destructive testing for ferromagnetic workpieces up to 700mm in length and 200mm in diameter, including near-surface areas.
3. Two independent, infinitely adjustable magnetic fields for circumferential and longitudinal magnetization, allowing for separate circumferential or longitudinal magnetization of workpieces, enabling the detection process of the remanence method.
4. The circumferential and longitudinal magnetization fields can be combined to achieve composite magnetization of the workpiece, enabling a single inspection of the circumferential and longitudinal crack defects in the workpiece, and realizing a continuous inspection process.
5. Universal TypeFluorescent Magnetic Particle InspectionThe machine is equipped with a decaying demagnetization function, with a demagnetization time of 2 seconds per piece.
6. Standard equipped with a handwheel adjustment device, allowing the pole spacing to be easily adjusted according to the length of the workpiece, offering flexibility and convenience.
7. PLC microcomputer control; the operator only needs to place and remove workpieces for observation, with all other functions automatically completed. Magnetization detection time is approximately 8 seconds per piece.
8. Left-right swinging control panel with foot switch, offering two control methods for hands-free operation.
General-purpose FluorescentMagnetic Particle Inspection MachinePrice, General TypeLuminous Magnetic PowderNon-destructive testing machineQuotations, Manufacturer of Universal Fluorescent Magnetic Particle Inspection Equipment
