Cold mist fountain equipment has seen rapid growth in the context of modern real estate development. The mist scenes created by cold mist equipment not only provide a sense of elegance but also offer the refreshing coolness of the mist, leaving people feeling refreshed. As a landscape equipment, cold mist fountain devices have numerous functional features, yet maintenance is crucial for their longevity. So, how should the maintenance and care of cold mist fountain equipment be carried out?

1. Monthly inspections and tightening of loose screws are required for the underwater lights of the cold mist fountain equipment (pay special attention to running fountains) to prevent water from entering the light body and causing short circuit failures.

2. Cold mist fountain equipment should be regularly started and operated (changed daily for high-frequency use, once for low-frequency use) to prevent performance degradation.

3. The cold mist fountain equipment's suction port should be cleaned monthly to prevent debris from clogging the intake, which can reduce efficiency and even cause damage to the equipment.

The cable connections for cold mist fountain equipment must be performed under water-free conditions and protected with three layers of tape, insulating tape, and high-voltage insulating tape.

Before the cold mist fountain equipment is shut down, the water in the pipes should be drained to prevent the pipes from freezing and cracking.

6. The cold mist fountain equipment should be cleaned every six months. Pay attention to the vertical pipe of the nozzle during cleaning to prevent damage.

7. Cold mist fountain equipment requires regular maintenance; every six months, the electrical components inside the cabinet should be inspected and properly maintained.

The article primarily introduces the maintenance methods for cold mist fountain equipment. You can refer to these methods for operations in the future, and the results are quite impressive. Maintenance and inspection of the cold mist fountain equipment should be conducted with the power off. In cases where live electrical work is necessary, protective measures must be taken, and important areas should be supervised by designated personnel.