Network Line Interferer Zhaoneng ZK-07 Gigabit 4-Channel Line Interferer

Network Line Interference Device - Zhongan Xingkun ZK-07 Gigabit 4-Port Ethernet Line Interference Device

For office buildings that do not meet the standard, installation of the line interference devices can be done without damaging walls or interior/decoration, without affecting the use of PCs, and without moving office equipment. Simply connect the PC's network card output to the interference device's power port, and connect the other interference device's power port with the original RJ-45 connector to complete the job.
Installation and Configuration Method for Line Conduction Interference: The line conduction interference should be installed according to the diagram, simple and convenient.

Test Conclusion
The electromagnetic interference signal emitted by the tested jammer can overwhelm the leakage information on unshielded twisted pair cables within the frequency range of 1MHz to 1GHz.
② The electromagnetic interference signal emitted by the tested jammer does not affect the normal transmission of data during both low-speed and high-speed data transmission over the network.
  No defects.
Our company has conducted tests on the transmission of image files and data files, as well as potential error codes that may arise during the operation of the line interference conductors, using various testing technologies. The results are as follows:
① Low rate: 40 billion bits tested, no errors detected.
② High-speed: Measures 8 billion bits with no errors.

Frequency Range
Interference transmission frequencies range from IMHz to IGHz, effectively protecting confidential information. Green and environmentally friendly.
Utilizing a unique conduction interference technology, the interference signal is only transmitted within the Ethernet cable, emitting only trace amounts of electromagnetic waves into space, thus posing no harm to the human body.
Low interference power
Utilizing a unique coverage technology, it is possible to mask signal leaks over the Ethernet cables without the need for high-power interference sources.
Easy to install and use
Standard enclosure design for easy installation, clean interfaces, and user-friendliness.

．Interference Frequency: IMHz to IGHz
．Interference Intensity: > 3dB above normal transmission signal
Operating Temperature: 10°C to 35°C
Operating Humidity: HR < 75%
Working Voltage: 220V ±5%
Continuous Operating Time > 20,000 hours