AN-19 Network Line Interferer - Gigabit 8-Port Ethernet Line Interferer

Network Line Interference Generator AN-19 - 100Mbps 4-Port Ethernet Line Interference Generator

For office buildings that do not meet the standards, when installing line interference devices, there's no need to break walls or slots, causing no damage to the interior and exterior decorations, and it won't affect the use of PCs. No need to move office equipment. Simply connect the PC's network card output to the electrical port of the interference device, and the other interference device's electrical port to the original RJ-45 connector, and the job is complete.
Installation and Configuration Method of Line Conduction Interference: The line conduction interference should be installed according to the diagram shown, simple and convenient.

Test Results
The electromagnetic jamming signal emitted by the tested jammer can淹没the leaked information on unshielded twisted pair cables across the frequency range of IMHz to IGHz.
② The electromagnetic interference signal emitted by the tested jammer does not affect the normal transmission of data during both low-speed and high-speed data transmission on the network.
  No defects.
Our company has conducted tests on the transmission of image files and data files, as well as potential error codes that may arise during the operation of the line interference conductors, using various testing techniques. The results are as follows:
① Low error rate: Measured at 4 billion bits, no errors detected.
② High speed: Measures 8 billion bits, no errors.

Frequency Range
Interference transmission frequency ranges from I GHz to I GHz, effectively protecting confidential information. Green and eco-friendly.
Utilizing a unique conduction interference technology, interference signals are transmitted only within the Ethernet cable, emitting only minute amounts of electromagnetic radiation into space, thus posing no harm to humans.
Low interference power
Utilizing unique shielding technology, it is unnecessary to use high-power interference sources to cover the leaked signals on the network cable.
Easy installation and use
Standard enclosure design for easy installation, simple interfaces, and user-friendly operation.

．Interference Frequency: IMHz to IGHz
．Interference Intensity: > 3dB above normal transmission signal
Operating Temperature: 10°C to 35°C
Operating Humidity: HR < 75%
AC Working Voltage: 220V ±5%
Continuous Operating Time > 20,000 hours