AN-19 100Mbps 4-Port Ethernet Line Interferer

Network Line Interference Generator AN-19 100Mbps 4-Port Ethernet Line Interference Generator

For office buildings that do not meet the standard, installation of line interference devices can be done without breaking walls or slots, without damaging the interior and exterior decorations, without affecting the use of PCs, and without moving office equipment. Simply connect the PC's network card output to the interference device's electrical port, and the other interference device's electrical port to the original RJ-45 connector, and the job is complete.
Installation and Configuration Method for Line Conduction Interference: The line conduction interference should be installed according to the illustrated method, simple and convenient.

Test Conclusion
The electromagnetic interference signal emitted by the tested jammer can overwhelm the leakage information on unshielded twisted pair cables within the IMHz to IGHz frequency band.
② The electromagnetic interference signal emitted by the tested jammer does not affect the normal transmission of data during both low-speed and high-speed data transmission on the network.
  No defects
Our company has conducted tests on the transmission of image files and data files using various testing techniques, as well as potential error codes that may arise during the operation of line interference conductors. The results are as follows:
① Low error rate: tested for 4 billion bits, no errors.
② High speed: Measures 8 billion bits, no errors.

Frequency Range
Interference transmission frequencies from 1MHz to 10GHz, effectively protecting confidential information. Green and environmentally friendly.
Utilizing a unique conduction interference technology, interference signals are only transmitted within the Ethernet cable, with only trace amounts of electromagnetic radiation emitted into space, thus posing no harm to the human body.
Low interference power
Utilizing unique coverage technology, it is possible to eliminate signal leakage over the Ethernet cables without the need for high-power interference sources.
Easy installation and operation
Standard enclosure design for easy installation, simple interfaces, and user-friendliness.

．Interference Frequency: IMHz to IGHz
．Interference Strength: > 3dB above normal transmission signal
Operating Temperature: 10°C to 35°C
Operating Humidity: HR < 75%
AC Working Voltage: 220V ±5%
Continuous Operating Time > 20,000 Hours