One: Stone Floor Decoration Structure

Stone tiles are categorized into wall tiles and floor tiles, with wall tiles further divided into exterior and interior stone types.

Common specifications and sizes of exterior stone wall materials (in millimeters): 25x25, 45x45, 45x95, 73x73, 95x95, 100x100、140x280、100x200、60240, 45x145, 45x195, etc.

Common specifications and sizes for interior wall stone (in millimeters): 200x300、250x330、300x450、300x600、250No Chinese content provided.

Common Ground Stone Sizes (in millimeters): 300x300、300x330、500x500、600x600、800x800、1000No Chinese content provided.

Some stone manufacturers can produce other specifications upon request, with non-standard sizes being more expensive.

The stone used for indoor flooring is typically polished slabs, with a thickness of around 20 millimeters. Thin slabs, about 10 millimeters thick, are also available for home decoration, with each piece measuring approximately 300.300mm to 500mmFor a thickness of 500mm, thin plates and 107 adhesive can be used with a 1:2 cement砂浆 mix.

Section II: Basic Process Flow for Stone Floor Decoration

Clean and prepare the subfloor - level with cement mortar - set grade, mark lines - select materials - soak boards in water - install standard blocks - spread cement mortar - lay stone tiles - grout - clean - maintain - hand over.

III. Construction Key Points

Surface treatment must be clean; uneven areas should be chiseled and repaired first. The base should be clean, free of mortar, especially white lime mortar and oil stains, and the ground should be moistened with water. When laying stone or ceramic tiles, standard blocks must be placed, ideally at the intersection of the cross lines and diagonally installed. During installation, a line should be hung sequentially for each row. Stones must be soaked and moistened, and the back should be wiped clean after air-drying. It is crucial to maintain the stone and ceramic tile flooring after installation; water must be sprinkled for maintenance 24 hours after installation, and sawdust should be used to cover and protect the flooring after completion.

Please note: Cautionary Measures

Before laying, perform a trial assembly of the boards to ensure consistent patterns, colors, numbering, for a uniform floor tile design.

Stone must be soaked and dried in the shade to prevent issues such as hollowing and peeling, which may affect its setting and hardening.

After installation, avoid walking on the surface for two to three days.

The above introduces the methods of stone laying. If you have any further questions, feel free to consult our website, where professionals will be happy to explain.