1. Preparing the bearing layer and sub-base: The bearing layer is a flat surface designed to support the loads from the upper components. Its properties should include strength, support, stability, and sealing. The stone cladding sub-base is the component directly onto which the stone cladding is laid.

2. Prepare the adhesive mixture:

Mixed adhesive is applied between the base and stone cladding panels. This product, with a small portion pre-mixed and ready-to-use, is generally mixed and prepared on-site before laying the stone cladding panels.

3. Official Installation Begins:

The formal installation process of stone cladding panels, which involves sequentially laying stone floor panels or wall panels onto the ground or the designated decorative wall surfaces.

4. Grouting and caulking:

The process involves selecting appropriate materials such as sealant, plaster, thin mortar, and joint fillers to seal the gaps between the flooring boards.

5. Further refinements to the decorative panel surface:

This process involves sanding and polishing the floor, and if the flooring material is rough, the pre-determined method is to polish on-site.

Above is the introduction to the process flow of stone paving construction. If you have any further questions, feel free to consult our website, where we have professionals ready to explain.