Top-mounted magnetic float level gauge

Main Specifications / Special Features:

The LRD-UHZ Top-mounted Magnetic Float Level Gauge is suitable for indicating liquid levels in various underground tanks, pits, and containers that are not suitable for side hole openings. The gauge is made of stainless steel, steel-lined polypropylene, and steel-lined polytetrafluoroethylene. Due to the complete isolation of the level gauge's detection indicator from the medium being measured, it features clear level indication, easy observation, and safety and reliability.

Offer matching instruments for resistance, current, and switch types for remote transmission, or connect to DCS, PLC systems, or equip with intelligent digital display control instruments for easier remote detection, control, and alarm.

Technical Specifications:
       Measurement Range: 0-4000mm
Nominal Pressure: 1.0 MPa; 1.6 MPa; 2.5 MPa; 4.0 MPa
Nominal Diameter: DN150
Operating Temperature: -40~80℃
Measurement Accuracy: ±10mm
Medium Density: Level: ρ≥0.5g/cm³
Position: ρ1-ρ2 ≥ 0.25 g/cm³
Material for Receiving Liquid: 1Cr18Ni9Ti
Flange Standard: JB82-59 (Level gauge flange: Flat or raised face flange)
Heating jacket connection: ZG1/2" (Male thread)

Upper and Lower Limit Alarm:

     Output Signal: One Normally Open, Two Normally Closed
(Or, please specify for normally open or normally closed orders)
Ambient Temperature: -20~40℃
Operating Temperature: -40~120℃
Measurement Accuracy: ±10mm
Working Life: ≥105
Protection Level: IP65
Power inlet: M20×1.5 (female thread)
Ex-proof type, explosion-proof marking:
Exproof Type: dIIBT4
Intrinsic Safety Type: iaIICT5