Hollow plastic boards are widely used in various industries due to their moisture-proof, waterproof, and corrosion-resistant properties.,Now, even in agriculture, plastic honeycomb sheets are indispensable.,What are the key points to consider when using plastic honeycomb boards??

Dry plastic honeycomb boards do not use sealing adhesive. The advantage of the dry assembly system, for both potential board expansion beyond the sealing adhesive's elongation limit and aesthetic considerations, is that the sealing strips are pressed inside the strips, allowing the boards to move freely during expansion and load-induced displacement.

This assembly system is primarily used for small facilities such as garages, station canopies, eaves, greenhouses, and numerous other applications where glass alternatives are needed. When employing the wet assembly method, the basic requirement is that the sealing system must be able to withstand a certain amount of movement in the panels, allowing for thermal expansion without diminishing its bonding strength with the frame and panels.

It is generally recommended to use neutral silicone sealant and plastic honeycomb panels for wet assembly, but special attention must be paid to checking the chemical properties of the sealant used before application. Acidic and alkaline silicone sealants should not be chosen, as these curing agents can cause the panels to crack, especially when internal stresses are present. When selecting sealant, in addition to considering chemical compatibility, it is also crucial to focus on testing its elongation and weather resistance.

The characteristics of plastic honeycomb boards include the ability to cold bend into arches with varying radii along the rib direction.,Not only does it increase the采光 area while meeting the architectural design's curvature requirements, but it also enhances the material's load-bearing capacity, surpassing ordinary glass.