Color coated aluminum sheet/roll

Alloy Numbers: 1060 Aluminum Coil, 1100 Aluminum Coil, 3003 Aluminum Coil, 3004 Aluminum Coil, 3005 Aluminum Coil, 8011 Aluminum Coil Series, Temper: h18, h28, h16, h26, h14, h24, etc. Aluminum Sheet Thickness: 0.2mm-4.0mm, Maximum Coating Width: 1500mm. Standard Width: 1000-1300mm, Aluminum Coil Maximum Diameter: 1200mm; Aluminum Coil Internal Diameter: 150mm, 300mm, 505mm. Coil Weight: 2-3 tons/coil. Aluminum Plate: Polyester Series: ≥16um, Coating Hardness: (Pencil Hardness) ≥2Hb, Adhesion: Not less than Grade 1, Impact Resistance: Paint does not peel, no cracks, Coating Flexibility: 2t. Packaging: Export Packaging, Wooden Pallet Packaging. The elegant surface and good quality of the colored coated aluminum coil make it a user favorite in multiple fields. Due to different applications, special attention is needed. What are the precautions for using colored coated aluminum coils? If they are to be used, they should be at normal temperatures, not too hot or too cold. If used as a roof, the temperature should not be below 10 degrees. Before installation, a timely inspection should be conducted to ensure that the roof materials show no signs of wear, ensuring normal use and ensuring a normal service life. The bolt heads for fixing the colored coated aluminum coil should be sealed with a water-resistant material to prevent rust from rain. The processing environment temperature for colored coated aluminum coil should be above 7°C. The gap of the rolling system should be adjusted according to the thickness of the colored coated aluminum coil, and foreign objects on the roller surface and trays should be cleared. At the same time, check if the double-sided colored coated aluminum coil is delaminating. If delaminating, investigate the cause and take measures before continuing processing. To ensure the construction quality of the colored coated aluminum coil, strict adherence to the above conditions is required during installation.