Jurong City mixed barrier gates with on-site installation available

 Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, we have focused on the research and development of intelligent electric gate technology and comprehensive solutions for access management. Our main products include: retractable gates, suspended gates, sliding gates, courtyard gates, vehicle management systems, gate barriers, and smart home IoT devices. We achieve intelligent IoT management that is visible and controllable. Over the years, the company has adhered to the philosophy of "people-oriented, technology-assisted." At the same time, we continuously introduce international management experiences, achieving product technological advancement and humanization.

The residential gate system is a specialized equipment for managing the entry and exit of motor vehicle traffic on roads, now widely used at highway toll gates, parking lots, residential communities, and corporate entrances to handle vehicle in and out. Electric gates can be operated independently via remote control to raise or lower the barrier arm, or can be actively managed through a parking management system (i.e., an IC card system). Depending on the application of the gate, the barrier arm can be straight, 90-degree curved, 180-degree folding, or a gate.

When a vehicle passes through the ground induction loop, an inductive signal is transmitted to the vehicle detector. The vehicle detector then activates two relay signals: one for the entry into the ground induction loop and another for the exit. Each set includes both normally open and normally closed signals. Additionally, the barrier gate typically has a ground induction infrared input interface. Under normal circumstances, the vehicle detection signal is connected to the ground induction infrared interface. The barrier gate opens when a vehicle approaches and a card is swiped, and it closes automatically when the vehicle passes. However, if the supplier's product lacks a ground induction infrared interface, or if the interface is damaged, or if the new vehicle detector and ground induction infrared interface are not compatible, they connect the two signals of the vehicle detector to the barrier gate's open and close ports. This still ensures the barrier gate closes automatically when the vehicle passes and prevents the gate from opening when the vehicle touches the ground induction loop. The only drawback is that the barrier gate may open if the vehicle rolls over the ground induction loop. Another situation is when there is an issue with the barrier gate control board or the card swipe main board, primarily determined by how the现场 lines are connected.

1. This unit is equipped with full wireless control, offering both safety and convenience. Simply connect it to a 220V power source and ensure the housing is properly grounded, and it's ready for operation, eliminating the need for complex wiring and cabling work.

2. Features a special balanced organization design, with an aluminum wavebox integrated, allowing for slow start, quick movement, and slow stop of the gate rod. This results in the entire machine core being low-noise, quick in heat dissipation, stable and durable operation, and free of inertia!

3. This gate barrier features various interfaces, allowing you to connect accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beam cut-offs. It not only meets safety requirements for the gate barrier but also can be integrated with a toll collection system for active processing.