Where is Yizheng City Left Lane Barrier Factory, and which ones are better?

 Jiangsu 900 Intelligent Technology Co., Ltd. was established in 2018 and is a manufacturer and seller of electric gates in Jiangsu. For many years, it has been dedicated to the research and development of intelligent electric gate technology and comprehensive solutions for entrance and exit management. Key products include: retractable gates, suspended gates, sliding gates, garden gates, vehicle management systems, gate barriers, and smart home IoT devices. We achieve visible, controllable, and intelligent IoT management of products. Over the years, the company has adhered to the principle of "people-oriented, technology-assisted." At the same time, it continuously introduces international management experience, achieving product technologization and humanization.

The residential gate system is a specialized equipment for controlling motor vehicle access on roads, commonly used for vehicle in and out management at highway toll gates, parking lots, residential complexes, and corporate entrances. Electric gates can be independently operated via remote control to raise or lower the barrier arm, or can be actively managed through a parking management system (i.e., an IC card-based system). Depending on the application, the gate arm can be straight, 90-degree curved, 180-degree bent, or grille-style.

When a vehicle passes through the ground induction loop, an inductive signal is transmitted to the vehicle detector, which then triggers two relay signals: one for entering the loop and another for exiting. Each signal set includes both normally open and normally closed contacts. Additionally, the gate typically has a ground induction infrared input interface. Normally, the vehicle detection signal is connected to the infrared interface. The gate opens when a vehicle approaches and刷卡，and closes automatically as the vehicle passes. However, if the supplier's product lacks an infrared interface, or if the interface is damaged, or if the new vehicle detector and infrared interface are not compatible, they connect the detector's two signals to the gate's open and close terminals. This still ensures the gate closes automatically as the vehicle passes and prevents accidental opening when the vehicle touches the induction loop. The only drawback is that the gate may open if the vehicle is on the induction loop. Another scenario is that there's an issue with the gate control board or the card reading mainboard, which can be determined by inspecting the wiring on-site.

1. The machine is equipped with a full wireless control method, ensuring both safety and convenience. Simply plug into a 220V power source and maintain grounding of the housing, and it's ready for operation, preventing the complexity of wiring and cabling tasks.

2. Features include a special balanced-organ design, aluminum wave box integration, slow starting and fast movement of the rod, and slow stopping, resulting in low noise, rapid heat dissipation, stable and durable operation, and no inertia!

3. The barrier gate features multiple interfaces, allowing for connection to accessories such as pressure wave switches, vehicle detectors (ground sensors), and infrared beam cut-offs. It not only meets the safety requirements of the barrier gate but can also be integrated into a toll collection system for active processing.