The GEROYAL electric high-pressure threaded ball valves are composed of a forged steel high-pressure valve body and an electronic angular position electric actuator. The electric actuator features a monoblock structure, allowing direct on/off switching adjustment with a 220V power input. It can also be equipped with a servo module, controlled by input signals (4-20mADC or 1-5VDC) and single-phase power. The main components of the electric high-pressure threaded ball valve are forged by professional manufacturers, overcoming the potential defects of cast steel valves, maintaining uniform compressive strength under higher working pressures. Suitable for non-corrosive media such as water, oil, gas, and acidic or alkaline corrosive media. These valves are widely used in industries such as chemicals, petrochemicals, natural gas, metallurgy, and in environments with hydrogen sulfide, high levels of impurities, and severe corrosion.
Electrical High Pressure Threaded Ball Valve - Main Technical Parameters and Performance
| Nominal Pipe Size DN (mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Allowable Pressure Difference (MPa) | Nominal Pressure ≤ | |||||||||||||
| Valve body type | Three-piece forged valve body | |||||||||||||
| Nominal Pressure | PN16.0、25.0、32.0、42.0 MPa；ANSI 150、300、600、900、1500、2500LB | |||||||||||||
| Connection Type | Threaded (External Thread, Internal Thread) | |||||||||||||
| Sealed packing material | Nylon, V-shaped polytetrafluoroethylene filling | |||||||||||||
| Valve stem design | O-shaped ball valve core | |||||||||||||
| Flow characteristics | Approximate quick-opening feature | |||||||||||||
| Motion Range | 0～90°、0～360° | |||||||||||||
| Leakage Quantity Q | Soft-sealed: Zero leakage | |||||||||||||
| Basic Error | ±1% | |||||||||||||
| Back to Back | ±1% | |||||||||||||
| Dead zone | ≤1% (adjustable) | |||||||||||||
| Adjustable Range | 250：1 | |||||||||||||
| Configuration Actuator | Available with PSQ, BV-TORK, UNIC, 361RS, OV-TORK series angular position electric actuators. | |||||||||||||
| Control Method | Toggle switch indicator (2-position switch control), Passive contact signal, 1/5K potentiometer, Intelligent adjustment (4-20mA analog signal control) | |||||||||||||
Electric High Pressure Threaded Ball Valve Actuator Technical Specifications
| Actuator Category | Introducing the OV-TORK Series Actuator Specifications | Introducing the BV-TORK series actuator specifications |
|---|---|---|
| Power Voltage | Standard: 220V AC Single Phase; Optional: 110V AC Single Phase, 380/440V AC Three Phase, 24V/110V/220V AC | |
| Output Torque | 50N·M～2000N·M | 50N·M～3000N·M |
| Action Range | 0～90° 0～360° | 0° to 90°, 0° to 270° available |
| Action Time | 15/30/60 seconds | 18S～112S |
| Protective Device | Overheat Protection | Built-in overheat and overload protection |
| Ambient Temperature | -30°～60° | -20℃～+70℃ |
| Manual operation | With handle for operation | Mechanical clutch mechanism, with handwheel operation |
| Mechanical Limit | Electrical and mechanical double-limiting | 2 external adjustment bolts |
| Ingress Protection (IP) rating | IP65 | IP65, IP67, customizable IP68 |
| Intrinsically Safe Rating | Non-explosion-proof | ExdⅡ BT4,ExdⅡ CT6 |
| Position Measurement | Optional switch or potentiometer | Potentiometer, Proportional Control Unit |
| Drive Motor | 8W/E | Cage induction asynchronous motor |
| Input interface | PE 1/2" Entry Line Lock | 2 PF 3/4" |
| Housing Material | Aluminum alloy | Steel, aluminum alloy, aluminum bronze, polycarbonate |
| Outer coating | Dry powder, epoxy polyester, with strong anti-corrosion properties | |
Electrical High Pressure Threaded Ball Valve - Main Component Materials
| Part Name | Parts Material | ||
|---|---|---|---|
| Valve body | 304 | 316 | 316L |
| Sphere | 304 | 316 | 316L |
| Valve stem | 304 | 316 | 316L |
| Valve seat sealing ring | PTFE, Carbon Fiber + PTFE, Para-Phenylene, High Pressure Nylon Seals | ||
| Filling material | V-shaped PTFE, reinforced PTFE | ||
Electrical High Pressure Threaded Ball Valve - Key Performance Indicators
| Nominal Pipe Size (mm) | DN15-300 | |||||
|---|---|---|---|---|---|---|
| Nominal Pressure | PN(MPa) | 10.0 | 16.0 | 25.0 | 32.0 | 42.0 |
| Test Pressure | Tensile Test | 15.0 | 24.0 | 37.5 | 48.0 | 63.0 |
| Seal Test | 11.0 | 17.6 | 27.5 | 35.2 | 46.2 | |
| Low-pressure密封test | 0.5～0.7 | |||||
| Applicable Medium | Natural gas, water, oil, steam, nitric acid (temperature ≤ 130℃), acetic acid (temperature ≤ 200℃) | |||||
Electrical High Pressure Threaded Ball Valve - Product Selection
(1) Valve Body Parameters: nominal bore size, working pressure, process medium, application, material of the body, etc., a series of parameters.
(2) Actuator Parameters: Power Voltage, Control Method, Control Signal (4-20mA, 1-5V), Operating Mode (Electrical-Open, Electrical-Closed)
Please provide as detailed technical specifications as possible, which will facilitate our production and technical team in accurately selecting the right products for you. Should you have any questions, feel free to call us, and we will strive to offer you excellent service!
