Edge bending mold

In the switchgear industry, there is often a need to bend busbars at the edges, particularly in electrical switches that require more connection space. The public elbow effectively addresses this issue and can be conveniently installed on professional busbar racks. It is suitable for the sides of copper busbars with this type of bend to prevent any surface deformation. This head can bend busbars from 10 * 40 to 90 degrees, and from 50 * 45 to 45°. Stay tuned for more on the types of busbar bending machines.

Busbar manufacturing machine types

Z-Bend Die

In certain designs, designers need to place two elbows side by side, which is impossible with simple heads. Therefore, they use Z-shaped elbows to achieve excellent results. The design of the Z-shaped elbow mold is manufactured based on the applicant's drawings. Stay tuned for more types of busbar manufacturing machines.

Twisted Molding:

In certain cases, the orientation of copper bars is not a single direction; most operators must use several copper bars. However, by using chocolate bending heads, they can rotate the copper bars to the desired degree. This complex bending mold is installed and operated on professional busbar machines, capable of rotating a 60x60 busbar by 90 degrees. This mold is also known as twist bending. Stay tuned for more on the types of copper bar processing machines.