Rubber soft joint with flange set

Flange, also known as a flange disc or boss, is a component used for connecting shafts or for joining pipe ends. It is also used at equipment inlets and outlets, such as reducer flanges, for connecting two pieces of equipment. A flange connection or flange joint refers to a removable connection formed by the combination of a flange, a gasket, and bolts. Pipe flanges are the flanges used in piping installations, and when used on equipment, they refer to the equipment's inlet and outlet flanges. Flanges have holes, and bolts secure them tightly together. They are sealed with a gasket. Flanges come in threaded (screwed) connections,焊接 (welded) flanges, and clamp flanges. Flanges are always used in pairs; low-pressure pipelines can use threaded flanges, while those above 4 kg of pressure use焊接 flanges. Two flange discs are joined with a sealing pad and then bolted together. Flanges of different pressures have different thicknesses and require different bolts. In the case of pumps and valves, when connected to pipes, the local parts of these equipment items are also made into corresponding flange shapes, also known as flange connections. Any connection piece that uses bolts to connect two flat surfaces and seal them is generally called a "flange," such as the connection of ventilation pipes. Such components can be referred to as "flange-type parts." However, this type of connection is only a part of a single device, like the connection between a flange and a pump, so it's not appropriate to call the pump a "flange-type part." Smaller items like valves can be called "flange-type parts."