详情描述

I. Product Overview:

 

The IH horizontal corrosion-resistant chemical pump is a single-stage, single-suction (axial suction) cantilever centrifugal pump designed for transferring corrosive liquids containing no solid particles with a viscosity similar to water. It follows the international standard ISO 2858 for marking, rated performance, and dimensions, featuring a wide performance range, high efficiency, high level of "three modernizations," and ease of maintenance. Its efficiency is an average of 5% higher than that of the F-type pump, making it a nationally promoted energy-saving product.

 

II. Product Application:

 

The IH-type horizontal corrosion-resistant chemical pump can transport media with temperatures ranging from -20℃ to 105℃, and a double-end face seal cooling unit can be used upon request for temperatures up to 300℃. It is suitable for industries such as chemicals, petrochemicals, metallurgy, power, papermaking, food, pharmaceuticals, environmental protection, wastewater treatment, and synthetic fibers, for transporting various corrosive or non-polluting media similar to water.

 

III. Technical Specifications:

 

IH Horizontal Corrosion-Resistant Chemical Pump

Flow Rate: 6.3～400 m³/h

Flow Range: 5-132m

RPM: 2900, 1450 r/min

Power: 0.55～110 kW

Import diameter: 50-200mm

Maximum Working Pressure: 1.6 MPa.

 

Section 4: Model Significance:

 

IH Type Horizontal Corrosion-Resistant Chemical Pump

IH80-65-160A

IH-International Standard Chemical Industry Centrifugal Pump

??80 - Inlet Diameter (mm)

Exhaust Outlet Diameter (mm)

160 - Impeller Nominal Diameter (mm)

A- Impeller Outer Diameter After First Cut