DS-PDSMK-B01 Smoke Detector

• Detection Technology: Utilizes photoelectric sensing principle to analyze and judge smoke during fire occurrence through a microprocessor, and outputs alarm information.
• Audio-Visual Alarm: Built-in audio-visual alarm, the sound and light will not cease until the smoke dissipates.
• Anti-Insect & Anti-Interference: Utilizes an optical maze design, dust-proof, insect-proof, resistant to light interference, and prevents false alarms
• Fire Certification: Meets CCCF Fire Certification
• Non-polarized wide voltage operation: DC 9~30V

Display Method

Indicator Light:

Standby: Red light blinks once every 40 seconds Alarm: LED light flashes rapidly, buzzer sounds Test: Fast flash three times in 2 seconds, buzzer beeps three times

Standard Parameters

Application Scenario:

Suitable for residential, industrial, commercial, hotel, office, educational, banking, library, and warehouse facilities, it is recommended to install the device in the center of the roof, avoiding blind spots, ventilation openings, and other areas that may affect detection effectiveness.

Bracket:

With installation board

Weight:

120g

Dimensions (W x H x D):

φ102*43mm

Installation Method:

Ceiling Mount

Electrical Performance

Power Consumption:

Static Power Consumption: ≤0.2mW, Alarm Power Consumption: ≤120mW

Power Supply:

DC9~24V,

Operating Temperature:

-10 ~ 50°C

Operating Humidity:

10% ~ 90%

Storage Temperature:

-20°C ~ 60°C

Software Features

Scenario Setup:

1. Suitable for residential, industrial, commercial, hotel, office, educational, banking, library, and warehouse facilities, etc. 2. It is recommended to install in the central position of the roof, avoiding corners, ventilation openings, and other areas that may affect the detection effect. 3. Unsuitable installation scenarios: A. Places with excessive accumulation of dust, powder, and steam. B. Areas where corrosive gases may be produced. C. Ventilation openings with wind speeds exceeding 5 meters per second. D. Places with excessively high temperatures and humidity.

Hardware Interface

Alarm Output:

Relay normally open and normally closed outputs, current and voltage ratings: 3A 24VDC

Anti-theft:

Support

Functional buttons:

With self-check button

Buzzer:

Support

Detection Performance

Target Detection:

Detect smoke generated during a fire and promptly emit an alarm signal.

Certification Level

Certification Level:

CCCF