Preparation for Starting a Vacuum High-Efficiency Disperser
1. Place the impeller in the center of the disperser container, press the down button, and lower it to the low position or the required position.
2. Both handles must be securely locked before the machine can be powered on.
3. Start the main motor, press the button to adjust the speed as required by the operation.
4. During operation, frequently monitor the current. If overload operation is detected, immediately stop and inspect the cause. Take necessary measures before resuming the operation of the discharger.
Design Parameters of Vacuum High Power Disperser:
Complete Set: includes disperser, hydraulic discharge machine, two material cylinders, vacuum system, control system

注意事项 for Disperser Shutdown:
First, shut off the main motor to stop the impeller from rotating completely.
2. Activate the up button on the disperser to raise the main shaft impeller above the container and clean the impeller.

Vacuum High-Power Disperser Structure:
1. Transmission section: 2 high-speed motors, 1 low-speed motor, and a mixer control cabinet.
2. Agitator Section: 2 high-speed dispersal shafts, 1 low-speed scraping edge and bottom shaft; equipped with 2 layers of butterfly blades + 1 dispersal disc on the high-speed shaft, scraping edge and bottom material with low-speed scraping, combined agitation.
3. Design Styles:龙门式 (Gantry Style), 单臂式 (Single Arm Style), 平台式 (Platform Style)
4. Main Material: Carbon Steel + Stainless Steel
5. Control Systems: Standard and Explosion-Proof EX Type. This system is for the full set of equipment control operations. It consists of an electric control cabinet and an operator button panel. Each moving part has strict interlock, ensuring convenient, safe, and quick operation.
6. Hydraulic Lifting System: consists of plungers, hydraulic cylinders, oil tanks, sealing devices, motors, gear pumps, valves, piping components, etc.
7. Design Capacity: 5-5000L, flexible customization.