Before Use

Ensure the weighbridge is level and all four legs are on the ground.

Ensure that the power and signal connection lines are properly and securely plugged in.

3) After the weighbridge is turned on and reset, confirm that there is weight when stepping on it and that it returns to zero properly when released.

4) Confirm that the weighbridge's range is suitable for the goods to be weighed.

5) Before using the weighbridge, it's recommended to preheat the machine for 3 minutes.

Two, in use

Handle goods with utmost care and gentleness.

2) Ensure that the goods are placed as centrally as possible on the weighbridge to ensure consistent force distribution across all four sensors.

3) Forklifts of various types must not collide with the weighbridge body during cargo loading to prevent it from moving.

4) Do not move the weighbridge at will; otherwise, it will need to be re-calibrated.

5) If the weighbridge is operating solely on battery power, ensure the battery charge is at a normal level.

6) During the weighing process, ensure that the goods are entirely above the ground scale; a small portion touching the scale is not permitted, as the weight measured would not be the actual weight of the goods.

7) The weight value displayed on the weighbridge must be stable before reading and removing the goods.

8) Goods to be weighed should be placed flatly; if unstable, do not support with one hand while weighing.

Remember to peel what needs to be peeled.

10) If you encounter any abnormal display prompts, consult or have them repaired by professionals.

Three, post-use

Remember to turn off the power after fully charging.

2) The weighbridge platform may not be used as a platform for storing idle goods.

Ensure the weighbridge is clean and hygienic overall.

Ensure the weighbridge is protected from sun and rain (this applies to small weighbridges).