Germany SCHMIDT yarn tension gauge ETPB-100Zero-point adjustment is permitted in various tension gauge measurement scenarios to ensure measurement accuracy. Calibration for two different materials can be done based on the material provided by the customer. An internal material diameter compensator is built-in, in modelDTS-5000In tension gauges with higher measuring ranges, enhance the measurement accuracy after changing the diameter. To accommodate online use, the installation holes allow for a fixed-mount setup.
The ETPT tension gauge can be connected to a PC via USB for continuous reading monitoring on the PC.
Memory of 60,000 readings
Operators can select from 5 different storage modes:
Model S:Only display the statistical values for each series
Pattern H:Store XY charts for review after completing a series of measurements
Pattern C:Continuously record within the time frame set by the user.999 Series Measurement (2 Hz)
Pattern F:At a higher sampling rate (200 Hz), it is C.
Pattern D:Store individual readings and statistical information
| Calibration: | According to the SCHMIDT factory procedures |
| Accuracy: | ±1% of full scale ±1 digit or better (typical ±0.5% of full scale) |
| Measurement Unit: | CN, G, N, or lb, switchable |
| Out of Scope: | Approximately10% full scale, accuracy not guaranteed |
| Overload Protection: | 200% full scale |
| Measurement Principle: | Strain Gauge Bridge |
| Roll Deflection Measurement: | 0.5 mm |
| Signal Processing: | Digital |
| Damping: | Adjustable electronic damping, average |
| Internal Sampling Rate: | Approximately1 kHz |
| Sampling Rate: | 200 Hz，2 Hz：AVG， |
| Display: | Color TFT 128 x 160 |
| Display Update Rate: | Approximately2 times per second |
| Memory: | Average, MAX, MIN |
| Temperature Coefficient: | Gain: Full scale/°C less than ±0.01% |
| Temperature Range: | 10 – 45°C |
| Relative Humidity: | Relative humidity 85% |
| Auto Power Off: | ApproximatelyAfter 3 minutes of non-use |
| Power Supply: | LiPo battery (operates for about 20 hours on a single charge, takes about 3.5 hours to recharge) USB AC Adapter with 4 Adapters, 100...240 V AC (EU/USA/UK/AUS-NZ) |
| Building Materials: | Aluminum |
| Dimensional Diagram | ViewDimensions |
| Net Weight (Gross Weight): | Approximately310 grams (1220 grams) |
Other specifications of the ETX type
| Output Signal: | USB |
| Memory: | At 999 measurement cycles, it is 60,000. |
| Memory Mode: | 5 storage models with statistical evaluation and PEAK capture |
