1. Prior to installation, it is essential to establish the level line and vertical control points to ensure that subsequent construction is even, sturdy, and stable. Additionally, ensure that the distance between the joists and embedded components is within the standard range; if using expansion bolts for connection, consider the suitability of their specific placement as well. 2. Select the appropriate size and specification according to design requirements. 3. Leave sufficient gap widths between different materials (such as staggered joints) to prevent wall deformation due to load differences, which may affect the normal use of the structure later on. 4. Try to avoid cutting through the entire body; if it is necessary to cut, have personnel operate or obtain a qualified certificate after special technical treatment before using it, and follow the instructions as specified. (This helps prevent irregular cracks.) 5. Ensure that the dust at the jointing points is thoroughly cleaned (and washed with water if necessary), and that moisture is evaporated before proceeding with the adhesive application. (This is beneficial for the better performance of the adhesive mortar.) 6. Pay attention to the protection and maintenance of finished products (prohibiting impact on completed walls). In case of any issues, take prompt corrective measures to repair and perfect the work (to ensure it does not affect the quality of the project). This concludes all the information regarding the lightweight composite thermal insulation board. We hope it is helpful to you!