Are you familiar with our company's production of aluminum silicate fiber? Below, I will introduce the quality specifications for aluminum silicate fiber:

After the alumina silicate masonry is completed, cease the initial surface finishing. Flatten uneven areas with a pressure plate, and for larger gaps, cut and reshape alumina silicate fiber bricks to achieve a smooth and tight surface.

2. The thickness of the alumina silicate fiber brick lining must meet the specifications.

3. Thickness Measurement: After measuring the length and width, mark nine measurement points according to the diagram. Gently place the circular disk of the needle-type thickness gauge on the sample, aligning the hole with the measurement points. Position the indicator needle downward and carefully insert it into the disk hole. When the needle tip touches the sample, gently press the indicator to allow the needle to pass through the sample and touch the glass plate, then read the thickness.

4. The Al2O3 content of the aluminum silicate fiber bricks is not less than 45%.

5. Prior to laying silicate aluminum fiber bricks, stop the trial arrangement, ensure the separation layer is firmly bonded, and stagger the gaps.

Shandong Zhoucang Huanao, located in the hometown of the world-renowned short story master Pu Songling, boasts an advantageous geographical position with a panoramic view of the Silk Road Town. The region is rich in material resources, conveniently situated near National Highway 309, and serves as the economic hub of the city of Zhoucang. The company is a professional manufacturer of refractory insulation fiber materials, offering a variety of products including: alumina silicate wool, ceramic fiber blanket, ceramic fiber paper, ceramic fiber module folding blocks, alumina board, belt, rope, removable insulation sleeves, refractory fiber seam products, high-temperature insulation pads, heavy-duty refractory bricks, light-duty thermal insulation bricks, refractory mortar,不定形耐火材料, and heavy-duty refractory materials.