In the event of occurrence, the pressure and reflection as per the pre-set criteria are maintained. The explosion relief door can prevent pressure within this range, thus serving its protective purpose and avoiding any impact. Should the occurrence not reach the pre-set pressure, the explosion relief door can be used normally.

1. The membrane material and thickness of the explosion relief door should not be adjusted; adhere to the design standards.

2. Explosion relief door manufacturers should not use whole membrane panels except for the aluminum plates cut for slots. Instead, use single-jawed joint interfaces, and ensure the joint positions meet design specifications.

3. The screw holes around the explosion relief door should be open on the outside to reduce pressure during release.Explosion vent opening resistance.

Explosion relief doors should be sealed with asbestos rope or other sealing materials between them and the flange, and the pressure ring should be securely fastened with screws to ensure a tight seal.

5. Explosion relief door manufacturers recommend regular inspections.Explosion relief doors in use should be repaired or replaced if the membrane panels are worn through or corroded.

Regarding the daily maintenance of "explosion relief doors," this introduction comes to an end. If you wish to learn more about other common knowledge regarding explosion relief doors, please consult with us on our website.