Yongzhou Foundation Reinforcement Engineering Co., Ltd. Building Restoration and Reinforcement, Structural Transformation and Reinforcement. Which Yongzhou reinforcement company to choose? Choose Guode Reinforcement Company, specializing in foundation reinforcement for over a decade!

If the foundation sinks, the building will tilt, and the entire wall will crack, indicating a serious building hazard. For safety reasons, it is necessary to reinforce the foundation in cases of sinking buildings. So, what are the methods for reinforcing sinking foundations? Good Reinforcement Company has summarized ten methods for foundation reinforcement, hoping they will be helpful to you!

10 Methods for Foundation Reinforcement in Yongzhou

1. When the soil quality of an existing building's foundation is good and has high bearing capacity, the foundation area can be increased. The increased area should be 10% larger than the calculated value.

When recalculating the original foundation strength during the modification and addition of floors, the strength reduction should be based on the actual conditions.

3. When the subsoil of the house foundation is soft and has low bearing capacity, pile foundation can be used to bear additional layer loads. After the pile strength reaches the design requirements, new and enlarged foundation caps should be constructed on top, and the piles should be connected to the foundation as per regulations. Additionally, the settlement of the foundation should be calculated based on the specific circumstances.

4. For reinforcement engineering where the existing building has a reinforced concrete strip foundation, anchor bolt static pressure piles can be used according to the requirements of increased layer loads. If the width or thickness of the original reinforced concrete strip foundation does not meet the pile pressing requirements, the foundation should be widened or thickened before pile pressing construction. Methods such as tree root piles and jet grouting piles can also be employed for reinforcement.

5. Reinforcement and Transformation: When the original foundation has good stiffness and integrity, or there is a reinforced concrete ground beam, elevated beams or cantilever beams can be used to bear the additional structural loads of the new layer without reinforcing the original foundation. The cross-sectional dimensions and reinforcement of the beams should be determined by calculation. The beams can be placed under the original foundation or ground beam. When using precast elevated beams, the beams, piles, and foundation should be tightly connected, and the local compressive bearing capacity between the elevated or cantilever beams and the foundation or ground beam should be checked.

6. Reinforcement of Structures: When the upper structure and foundation have good stiffness, the bearing layer is shallowly buried, the groundwater level is low, and construction excavation will not cause additional settlement and cracking to the original structure, pile caps or static pressure piles can be used for reinforcement under the original foundation or in pit form.

7. When using ground grouting reinforcement method for the foundation of existing buildings, for collapsible loess foundation, filled land foundation, or other foundations that are prone to additional deformation due to grouting reinforcement, it is necessary to add expanders, rapid-set agents, and the like to prevent adverse effects on the added layer of buildings.

8. When the existing building is based on pile foundations, inspect the quality and condition of the original pile structure, measure the physical and mechanical properties of the soil, to determine the compaction status of the soil between piles, and enhance the bearing capacity of the original pile foundation based on the working conditions of piles and soil together. For the void situation between the pier cap and soil, do not consider the joint working of piles and soil. When the number of piles is insufficient, supplement piles appropriately. For rotten wooden piles or damaged concrete piles, reinforcement and repair must be carried out before additional layers can be constructed.

9. In cases where the original geological survey data of existing buildings is too simple or non-existent, and there are civil air defense projects or complex site conditions beneath the buildings, supplementary geotechnical surveys should be conducted to determine the site conditions.

10. When using the retaining wall column structure for direct story addition at Baogang, the column should be placed on the newly set foundation. The old and new foundations should form an integrated whole. If the subsoil beneath the new foundation is soil, the foundation construction should be carried out only after compacting gravel or using other reinforcement methods.

To prevent the discovery of hazardous conditions, it is imperative to carry out ground reinforcement engineering. The aforementioned article summarizes ten methods of ground reinforcement by Good Reinforcement Company. We hope that after reading it, you will have a certain understanding and that it may be helpful to you.

　　Good Reinforcement Co., specializing in house reinforcement for over a decade! Good Reinforcement Co.A comprehensive strengthening company specializing in engineering reinforcement and renovation, rebar reinforcement, carbon fiber reinforcement, steel bonding, steel wrapping, chemical anchors, crack repair, villa reinforcement, villa renovation, structural repair, engineering design, research, and construction. Guode Reinforcement Co. boasts a wide range of machinery and equipment, capable of selecting appropriate construction methods and machinery based on the characteristics of buildings and structures, as well as the surrounding environment. It is known for its fast pace, low costs, and minimal disruption to the surrounding area.

　　Good Reinforcement Co., specializing in foundation reinforcement for over a decade! Good Reinforcement Co.We are an engineering company with over a decade of experience in structural reinforcement, upholding the spirit of hard work and perseverance, and steadfastly adhering to the business philosophy of "customer first." As we enter the new century and look forward to the future, all our employees eagerly anticipate sincere communication and collaboration with friends from all walks of life. With our wisdom and hands, we strive to excel in engineering and provide excellent services, working together to create a brighter tomorrow!

The above is regardingYongzhou Foundation Reinforcement Company — Gude Reinforcement CompanyIntroduction, if you are looking forYongzhou Structural Reinforcement Engineering CompanyContact us for more information.