It's widely known that pleating machines are frequently used in the processing activities of garment machinery. They may encounter malfunctions during operation, and we should have targeted solutions. Below, we'll introduce how to address the pressing issues of pleating machines, which I'm sure many are curious about. Let's take a look with the editor!

There is a phenomenon of blade extrusion on the creaser machine, which is due to the lack of adjustability for the tilt angle and blade pressure. On older-style blade creasers, customers often use spacers to mechanically increase the distance between the creaser machine blades. However, friction issues remain evident as there is additional friction in the spacer area. We should consider the strict requirements for adjusting mechanical creasers to accommodate the increasing demand for high-sensitive media in the market in recent years.

Firstly, it is the filtration of gases and liquids. The pleating blade mechanisms at the top and bottom of the Zhejing machine are inclined before they come into contact and press the medium. The angle of inclination determines the travel distance of the material into the pleating machine. During the pleating process, the angle of the pleating blades, as well as the pressure and time of compression, are primarily determined by a rigid mechanical cam. This cam controls the movement of the blades and applies force between them. The cam system is designed to accommodate the overall requirements for the range of angles, compression pressures, and compression times of the pleating blades for general or standard filtration media.

Above, we mainly introduced the causes of extrusion phenomena in the folding machine and the fault analysis of the extrusion issue. If you have any doubts about our introduction, feel free to communicate with us. We will bring you more exciting information in the future. Please pay more attention and support us!