Product Parameters: 2-meter Insulated A-Frame Ladder, Material: Glass Reinforced Epoxy Resin, Thickness: 3mm. Insulated Combination Ladder: Sizes 1.5-6 meters, with platform, non-telescopic. Generally referred to as "A-Frame Ladder" by customers. The narrower step width is 38cm, and each step added requires an additional 3cm. The ladder's surface is ABS injection-molded, featuring slanted grooves for anti-slip protection. The tread can also be used to place small tools during personnel maintenance. The combination ladder is equipped with a red nylon strap to prevent excessive opening during use, ensuring safety.

1. Product Material: Epoxy Glass Reinforced Plastic

2. Product Material: The material is an epoxy resin square tube extruded by machine, with a general size of 30*60mm for single ladders and combination ladders, featuring a wall thickness of 3mm. For elevating ladders below 7 meters, a 9-character tube with a size of 30*70mm is used, while above 7 meters, a 30*80mm 9-character tube is utilized.

3. Product Process: Utilizes stamping and punching technology, with pin and rod engagement. These processes demand a higher quality of raw materials.

4. Voltage Rating: 35KV - above 2 meters; 110KV - above 3 meters; 220KV - above 4 meters

Step ladder load capacity: 150 kg

6. The certificate is an aluminum plate, with a sticker containing the instruction manual below it.

7. Features of the Insulated Hoist Lift:

Non-conductive, innovative design, and aesthetically pleasing

(2) Corrosion-resistant (with resistance to various corrosive gases and liquids such as acids, alkalis, organic solvents, and salts. Depending on the actual application requirements, it is economically feasible to choose phthalate, meta-phthalate, or vinyl resins as the matrix material), resistant to decay and discoloration

(3) Lightweight and easy to handle

(4) Low water absorption rate, excellent flame retardancy (flame spread rate of ordinary flame-retardant grating (ASTM E-84) not exceeding 25; flame spread rate of premium flame-retardant vinyl grating not exceeding 10. Oxygen index not less than 28 (GB 8924))

(5) High strength, lightweight (The density of glass fiber reinforced plastic grating does not exceed 2, which is only 1/4 of steel and 2/3 of aluminum. Its strength is 10 times that of rigid PVC, and its excellent strength surpasses that of aluminum and ordinary steel), impact resistance, good insulation, and excellent permeability.

Note: When unloading the ladder, start from the bottom level to avoid damage by picking up from the middle.