Loose-fitting flange with welding ring

Flange, also known as a flange disc or boss, is a component used for connecting shafts or for joining pipe ends. It is also used at equipment inlets and outlets, such as reducer flanges, for connecting two pieces of equipment. A flange connection or flange joint refers to a removable connection formed by the combination of flanges, gaskets, and bolts. Pipe flanges are specifically used for piping in equipment installations, while equipment flanges refer to the inlets and outlets of the equipment. Flanges have holes and bolts that secure them tightly together, with gaskets used for sealing between flanges. Flanges come in threaded (screwed) connections,焊接 (welded) flanges, and clamp flanges. Flanges are used in pairs; low-pressure pipelines can use threaded flanges, while those above 4 kg pressure require welding flanges. Two flange discs are joined with a sealing pad and then fastened with bolts. Flanges of different pressures have varying thicknesses and require different bolts. Equipment like pumps and valves, when connected to pipes, have corresponding flange shapes, also known as flange connections. Any connection piece that uses bolts to connect two flat surfaces and seal them is generally called a "flange," such as in ventilation pipe connections. Such components can be referred to as "flange-type parts." However, such connections are only a part of a device, like the connection between a flange and a pump, so it's not appropriate to call the pump a "flange-type part." Smaller components like valves can be called "flange-type parts."