1.Dust Treatment:Dust gently. The dust should be in the same position, from left to right or from left to right. Use a soft-bristled brush to clean the dust or dirt on the surface of the monitor. The cleaning brush has a uniform cleaning fluid dynamics level and can continuously clean according to the level of environmental pollution and the duration or aging level of use.
2.Clean:Apply specialized cleaning agents to the surface layer of the control module for basic cleaning.
3.Re-cleaned and dusted:Rinse the dust off the electrical simulation screen again with a soft bristle brush. Caution.:Always replace with a soft bristle brush. Soft bristles can be reused multiple times.bixuCleaning to prevent further environmental pollution.
4.Re-cleaned:Spray the specialized cleaning fluid onto the surface layer of the control module, clean again, and remove...2Dust removal work leaves behind dust. Based on the dirt on the dice, determine the ratio of cleaning solution to water. When the dirt is no longer visible, clean with tap water. Everyone should maintain an order from top to bottom or from left to right.
Mosaic Simulation Screen
5.Drying Process:In most cases, natural drying is recommended; however, in high-voltage switchgear simulation screen components, if the environmental humidity is high, the control panel accessories are low in temperature, and the surface layer is low in dryness.
6.Apply the specialized repair fluid evenly to the surface layer of the monitor for surface repair.
7.Dry wind:Under conditions of temperature, environmental humidity, and wind, the electric simulation screen's full-color screen can naturally induce wind. In situations of both high and low temperatures, the standard atmospheric pressure can be lower than...3kg。.Power Simulation Screen Repair Agent:The equipment boasts versatile functionality. That is to say, the dual actual effect of light and repair makes the power simulation screen look as good as new. At the same time, it has anti-static, anti-soiling, anti-rust, and anti-corrosion treatments. Dust easily falls into the water, retaining its flexibility and luster. The productpHNumeric7.5No harm to the host of the power simulation screen.
