详情描述


Product Details:

Inspection Length: 0-500mm from tube end

Detection Blind Spot - Longitudinal Damage: 0

Detection Blind Zone - Horizontal Damage: 2WT + 10mm (WT = Wall Thickness)

Detection Blind Zone - Layering/Thickness Measurement: 5mm (Edge of flat hole from tube end)

Inspection Coverage ≥110%

Detection sensitivity for longitudinal, transverse, and oblique cracks: GB/T5777 U2 level, crack length 25mm

Inspection Sensitivity - Layering: Detects layering in flat-bottomed holes with a diameter of 6mm, depth of 1/2WT, and wall thickness over 5mm

Detection Sensitivity - Thickness Measurement: Display accuracy ±0.01mm, measurement accuracy ±0.05mm

Detection Sensitivity - Wall Thinning: 25×25×12.5% WT Inner Wall Curved Groove

Signal-to-Noise Ratio: ≥8dB

Weekly Sensitivity Fluctuation: ≤3 dB

False alarm rate: Less than 1%

Reporting rate: 0%

Stability: 2 hours

Fluctuation Margin: ≤2 dB

Product Introduction:

Automatic pipe end flaw detection equipment, primarily for detecting blind areas at the ends of pipes in industries such as metallurgy, steelmaking, machinery, electricity, aerospace, and boiler manufacturing, which is a crucial step in ensuring the overall quality of the pipes. Categories of pipe end ultrasonic testing: localized water immersion pipe end ultrasonic testing, jet method pipe end ultrasonic testing, and pipe end magnetic particle testing.

Product Features:

1. End detection range: 0-500mm, length can be freely selected.

2. One-time flaw detection with longitudinal, lateral, and diagonal bidirectional incident inspections, as well as layer/thickness measurement.

3. Probing with active tracking and good coupling performance.

4. Non-contact probe, durable and long-lasting.

5. Full automation and digital testing with automatic data integration.