Product Description
· Main Material:
| Primary Material Main material | PP, PTFE, PVDF, etc. materials PP, PTFE, PVDF and other materials |
· Temperature:
| PP | PP usage temperature not exceeding 90℃ PP use temperature is not more than 90 ° C |
| PTFE | PTFE material has a service temperature not exceeding 220℃. PTFE material use temperature is not more |
| PVDF | PVDF material service temperature not exceeding 150℃ PVDF use temperature is not more than 150 ° C |
· Material Properties
Products with three materials all feature strong resistance to chemical corrosion.
Three materials are resistant It has strong chemical
· Application:
Widely used in industries such as gas purification, environmental protection (especially in ammonia-based desulfurization), desulfurization towers, metallurgy, etc.
Using plastic perforated plate corrugated packing in an anaerobic biofilter for dyeing and finishing wastewater treatment results in a filter with a short startup period, stable effluent quality, and strong resistance to shock load.
is widely used in gas purification, fertilizer, environmental protection (especially in ammonia desulfurization), fertiliz-er plant desulfurization tower, metallurgy and other indus-tries. If using plastic orifice corrugated packing in anaero-bic biofilter to treat printing and dyeing wastewater, the anaerobic biofilter has a short start-up period, stable effluent quality and strong impact load resistance.
· Technical Specifications:
The characteristic parameters of the plastic corrugated filler are as follows:
| Model Type | Peak Height Wave height mm | Wavy inclination angle Inclined angle | Specific Surface Area Surfacearea ㎡/m3 | Theoretical board number Theory sheet no. I/m | Pressure Reduction Pressure drop MPa/m | Holding capacity Liquid hold m3/m3 | Factor F F factor m/s(Kg/m3)0.5 |
| SKB-125Y | 22 | 45° | 125 | 2～2.5 | 100 | 0.045～0.05 | 3 |
| SKB-250Y | 11 | 45° | 250 | 2～2.5 | 130 | 0.04～0.05 | 2.6 |
| SKB-350Y | 8 | 45° | 350 | 3.5～4 | 180 | 0.35～0.045 | 2.0 |
| SKB-125Y | 22 | 30° | 125 | 0.8～0.9 | 140 | 0.045～0.05 | 3.5 |
| SKB-250Y | 11 | 30° | 250 | 1.5～2 | 100 | 0.04～0.05 | 2.8 |
| SKB-350Y | 8 | 30° | 350 | 2.3～2.8 | 180 | 0.35～0.045 | 2.2 |
Product Description
· Main Material:
| Primary Material Main material | PP, PTFE, PVDF, etc. materials PP, PTFE, PVDF and other materials |
· Temperature:
| PP | PP usage temperature not exceeding 90℃ PP use temperature is not more than 90 ° C |
| PTFE | PTFE material has a service temperature not exceeding 220℃. PTFE material use temperature is not more |
| PVDF | PVDF material service temperature not exceeding 150℃ PVDF use temperature is not more than 150 ° C |
· Material Properties
Products with three materials all feature strong resistance to chemical corrosion.
Three materials are resistant It has strong chemical
· Application:
Widely used in industries such as gas purification, environmental protection (especially in ammonia-based desulfurization), desulfurization towers, metallurgy, etc.
Using plastic perforated plate corrugated packing in an anaerobic biofilter for dyeing and finishing wastewater treatment results in a filter with a short startup period, stable effluent quality, and strong resistance to shock load.
is widely used in gas purification, fertilizer, environmental protection (especially in ammonia desulfurization), fertiliz-er plant desulfurization tower, metallurgy and other indus-tries. If using plastic orifice corrugated packing in anaero-bic biofilter to treat printing and dyeing wastewater, the anaerobic biofilter has a short start-up period, stable effluent quality and strong impact load resistance.
· Technical Specifications:
The characteristic parameters of the plastic corrugated filler are as follows:
| Model Type | Peak Height Wave height mm | Wavy inclination angle Inclined angle | Specific Surface Area Surfacearea ㎡/m3 | Theoretical board number Theory sheet no. I/m | Pressure Reduction Pressure drop MPa/m | Holding capacity Liquid hold m3/m3 | Factor F F factor m/s(Kg/m3)0.5 |
| SKB-125Y | 22 | 45° | 125 | 2～2.5 | 100 | 0.045～0.05 | 3 |
| SKB-250Y | 11 | 45° | 250 | 2～2.5 | 130 | 0.04～0.05 | 2.6 |
| SKB-350Y | 8 | 45° | 350 | 3.5～4 | 180 | 0.35～0.045 | 2.0 |
| SKB-125Y | 22 | 30° | 125 | 0.8～0.9 | 140 | 0.045～0.05 | 3.5 |
| SKB-250Y | 11 | 30° | 250 | 1.5～2 | 100 | 0.04～0.05 | 2.8 |
| SKB-350Y | 8 | 30° | 350 | 2.3～2.8 | 180 | 0.35～0.045 | 2.2 |
| 品牌： | Guo Tao |
| Primary Material： | PP, PTFE, PVDF |
| Feature 1： | Thinner wall processing |
| Feature 2： | High porosity |
| 单价： | 电议 |
| 最小起订Quantity： | |
| 供货总Quantity： | |
| 有效期至： | 长期有效 |
| 最后更新： | 2024-01-19 11:17 |
