Usage Instructions:

1.The correct method is to first pour water into the oil tank, then gradually add the calculated amount of concentrate while stirring (or circulating), ensuring thorough mixing. Afterward, use a sugar refractometer to measure the concentration until the desired mixture is achieved.

2.Additional Method: Due to consumption or water evaporation during use, the liquid concentration may deviate or the amount of liquid used may decrease. The correct method for replenishment is to first...1Prepare the diluted solution (adjust the concentration according to the actual situation; in general, during summer when water evaporates faster, the concentration of the supplement can be lower), then add it to the oil tank; if the concentration is too low, simply add the original solution directly, then use a sugarometer to measure until the desired concentration is achieved.

3.Water Quality Requirements: As water-soluble cutting fluids are diluted with water, the quality of water will directly affect the performance of the cutting fluid. Ideally, the water quality should be...

Concentration management is a crucial aspect of water-soluble cutting fluid management. Regularly measure the concentration of the top emulsion to maintain it within the recommended ± range.20%Within the specified range, it is an essential measure to ensure the normal use of cutting fluids.

Common methods for concentration determination include phase titration or simply using a refractometer, but the latter's management method has a larger margin of error, and users should master it based on their experience.

2.PHValuing Management

Cutting FluidPHOne of the direct causes of liquid degradation and part rusting is the value reduction, hence the frequent determination of the usage liquid.PHMaintaining the value within the specified range will effectively prevent premature spoilage and corrosion of the liquid.PHThe determination of value is well-adopted.PHCount to avoid mismanagement due to test strip errors. If foundPHThe phenomenon of value reduction is addressed by first conducting a concentration check. If the concentration is normal, then an addition is made.PHValue-up AgentWH-1If the concentration is low, first replenish the original liquid to correct the concentration.PHIf the value is still low, the same should be added.WH-1EnhancePHValue.PHValue-based management goal is8.5Above, generally speaking whenPHPlease provide the Chinese content to be translated.8.8At this time, it should be considered to add supplementary.PHNo Chinese content provided.