Direct Manufacturer of Aluminum Alloy Bars - 2024T3511 Aluminum Rod in Stock

2024T3511 Aluminum Alloy Rod Manufacturer Recommendation, 2024T3511 Rod Price List. The 2024T3511 aluminum rod is classified as a high-strength hard alloy, capable of heat treatment hardening. It has moderate plasticity under quenching and temper conditions, excellent spot welding and gas welding properties, but a tendency to form intergranular cracks during gas welding. The alloy maintains good machinability after quenching and cold working hardening, while its machinability is low after annealing. Corrosion resistance is not high, so anodizing and painting methods or the addition of an aluminum cladding layer are commonly used to enhance its corrosion resistance. 2024T351 is mainly used for manufacturing various high-load parts and components, such as structural parts on aircraft (fuselage, frame, ribs, beams, rivets, etc.) and components operating below 150°C. Due to its high strength and good fatigue strength, 2024T351 aluminum alloy is widely used in aircraft structures (fuselage, frame, rib beams, frames, etc.), rivets, propeller components, and other various structures. The density of 2024T351 aluminum alloy is 2.73 g/cm3 (0.098 lb/in3). The following characteristics are found in the 2024T351 aluminum alloy rod: 1. The density of 2024T351 aluminum alloy rod is low - the density of aluminum and aluminum alloys is close to 2.7g/cm3, about one-third of iron or copper. 2. The strength of 2024T351 aluminum alloy rod is high - the strength of aluminum and aluminum alloys is high. The base strength can be strengthened through a certain degree of cold working, and some grades of aluminum alloys can be strengthened through heat treatment. 3. The 2024T351 aluminum alloy rod has good electrical and thermal conductivity - aluminum has excellent electrical and thermal conductivity, second only to silver, copper, and gold. 4. The 2024T351 aluminum alloy rod has good corrosion resistance - the surface of aluminum is easily oxidized to form a dense and firm AL2O3 protective film, which can effectively protect the matrix from corrosion. Through artificial anodizing and coloring, casting aluminum alloys with good casting properties or wrought aluminum alloys with good plasticity can be obtained. 5. The 2024T351 aluminum alloy rod is easy to machine - vehicles made from aluminum and aluminum alloys can reduce energy consumption. The energy saved is far greater than the energy consumed in the production of aluminum.