Six Precautions for Diesel Generator Set Installation: 1. Ensure good ventilation at the installation site. The generator end should have sufficient intake, and the diesel engine end should have a good exhaust outlet, with the exhaust outlet area being 1.5 times larger than the radiator area. 2. Keep the installation site clean and free from items that produce corrosive gases and steam, such as acids and alkalis. If possible, install fire-fighting equipment. 3. When used indoors, the exhaust pipe must be led outdoors, with the pipe diameter being equal to or greater than the muffler exhaust pipe diameter. The bend of the connecting pipe should not exceed 3 to ensure smooth exhaust, and the pipe should slope downward by 5-10 degrees to prevent rainwater from entering; if the exhaust pipe is installed vertically upwards, a rain shield must be installed. 4. When the base is made of concrete, measure the levelness with a level during installation to secure the unit on a level foundation. A special shock-absorbing pad or anchor bolt should be placed between the device and the foundation. 5. The generator set's housing must have a reliable protective grounding. For generators requiring neutral point grounding, it must be grounded by a professional and equipped with lightning protection devices. It is strictly prohibited to use municipal power grounding equipment for neutral point direct grounding. 6. The bidirectional switch between the generator and the public power must be extremely reliable to prevent reverse power transmission. The wiring reliability of the bidirectional switch should be inspected and approved by the local power supply department. Precautions for Diesel Generator Set Operation: To better use the diesel generator set and avoid significant damage to the generator's lifespan during use, proper protective measures must be taken when moving or transporting the diesel generator set, and it must meet relevant performance requirements. Otherwise, damage to the generator equipment can occur accidentally. When transporting a diesel engine, ensure the carrying capacity of the transport vehicle is not less than 1.2 times the total weight of the equipment and accessories to prevent accidental damage. To prevent the generator from being exposed to wind and sunlight, necessary safety packaging must be applied, such as adding wooden boxes and waterproof lining. The generator should be securely fastened inside the vehicle to prevent vibration from loosening or damaging its components. During transportation, no one or objects should be allowed on the generator set to keep it under pressure. When loading or unloading the diesel generator set equipment from the vehicle, use forklifts or cranes and be careful to prevent the equipment from tipping over or falling to the ground, causing damage. The generator can be carefully lifted with a suspended crane or gently pushed and pulled using a forklift at the base of the equipment. Note that the lifting rope's carrying capacity and the rope's visual angle should be as vertical as possible to maintain the balance of the generator equipment. The lifting stress position should be as close to the generator's center of gravity as possible. The forklift's fork arm carrying capacity should be greater than 120-130% of the unit weight. In addition, it should be noted that radiators, intake manifolds, exhaust manifolds, and electrical components are relatively fragile parts of the generator. During transportation and movement, care must be taken to prevent collisions and unnecessary losses.