Dry and Wet Desulfurization and Deacidification

The working principle of this equipment: After combustion in the secondary combustion chamber, the regenerative flue gas...1100At a temperature of ℃SNCR Post denitrification, heat recovery through a waste heat boiler is utilized to lower flue gas temperature.550°C, then proceed to the rapid cooling tower for fogging rapid cooling to ensure that the temperature is550℃~200Temperature range of ℃1 Instantly cool down, effectively preventing the regeneration of dioxins, then the flue gas enters the dry desulfurization tower and is sprayed with lime and powdered activated carbon as absorbents. The absorbents deposit on the bag filter walls, forming a filter cake, allowing the deposited absorbents to continue absorbing gaseous pollutants and dioxins in the flue gas, achieving the purpose of desulfurization and removing dioxins. The absorbents deposit on the bag filter walls, forming a filter cake, to continue absorbing gaseous pollutants in the flue gas. After being cleaned by the bag filter, the flue gas is drawn into the wet desulfurization tower by a fan, where it is further desulfurized by spraying alkaline solution. After desulfurization, the flue gas enters a mist eliminator for water-gas separation, and then passes through an activated carbon adsorption box to further adsorb and remove trace harmful components remaining in the flue gas.

Product supports customization, fiberglassPPMetal materials are acceptable.