During wiring, connect one end of the heat shrinkable sleeve to the power source, ensuring the wire core at the other end is not short-circuited or in contact with conductive materials. It must be securely sealed with the provided end cap. In explosion-proof environments, use the matching explosion-proof junction box. The jacket must not be damaged, and the wire core must not be exposed.

To preventAccompany the TropicsLeakage and short-circuit protection is ensured by securing the heat-accompanied pipe and the accompanied pipe with cotton yarn tapes, glass fiber tapes, or heat-resistant pressure-sensitive adhesive tapes. It is strictly prohibited to use wires or plastic cables for binding. 

To enhance heat conduction and static electricity elimination, after the heat trace is tied and fastened to the pipeline (or equipment), an aluminum foil tape adhesive loop is added, with the spacing possible between cotton yarn or glass fiber tape loops. Generally, the spacing is...500mm～600mmDuring installation, the electric heating tape is laid while the aluminum adhesive tape is covered over it, and then firmly pressed flat to ensure the heating tape adheres tightly to the pipeline.Please provide the Chinese content to be translated.After applying adhesive aluminum tape, every other0.5MilletPlease provide the Chinese content for translation.The electric heat tracing tape is secured radially with pressure-sensitive tape.3~4Encircle the electric heating tape around the pipeline to ensure tight contact, enhancing heat transfer efficiency.No content provided for translation.Add thermal insulation for fixation