By utilizing a driven worm to rotate, the screw is moved up and down, achieving the function of pushing, pulling, or lifting.

1. Standard threaded rod electric push rods and screw jacks with locking performance, due to low comprehensive transmission efficiency, the majority have dynamic locking functions to enhance the safety of machinery and equipment operation; ball screw electric push rods and screw jacks are not locked.

2. Precision: The comprehensive positioning accuracy reaches 0.1mm; the servo electric cylinder positioning accuracy can go down to 6um.

3. Precisely adjust the configuration encoder, using a variable frequency inverter or controller for regulation, to achieve closed-loop control and precise positioning; if high accuracy is not required, a potentiometer can be configured for on-line adjustment.

The synchronous single-reduction motor drives multiple push rods simultaneously through mechanical connections, achieving synchronized lifting and lowering.

Drive System: DC motor 12/24V, single-phase AC motor, three-phase AC motor; no air/hydraulic source required.

The over-pressure protection can be configured with a safety clutch to prevent overload; an overload pressure sensor can also be configured to prevent overload.

7, High load push/pull force up to 300 tons.

Other maintenance is simple, operates quietly, and can function normally in high/low temperature, corrosive/explosive harsh environments. Key features include: locking performance, synchronization, precise positioning, speed adjustment, and thrust adjustment.