详情描述

Detailed Description

I. Product Performance Description

Our industrial sliding doors are primarily used for exterior and interior doors in warehouses, garages, factories, and airport terminals.

2. Features include smooth operation, low noise, thermal insulation, wind and dust resistance, and corrosion resistance.

3. Life Span: The normal lifespan of an industrial sliding door is not less than 200,000 cycles.

4. Wind pressure resistance: The wind pressure resistance of industrial sliding doors is not less than 750Pa. Special performance can be enhanced upon request.

5. Insulation Performance: Insulation performance meets or exceeds the level 6 as specified in GB/T8484-2002, "Classification and Testing Methods for Insulation Performance of External Windows of Buildings."

6. Open/Close Control: The control device is sensitive and lightweight. The opening and closing speed is 10-15m/min, with noise less than 65dB. In case of power failure, manual operation is used for opening and closing, with an action force below 100N.

7. Operating Voltage: AC 220V/380V, Power: 0.75 kW/1.5 kW/2.2 kW.

8. Control System Performance: Optional wireless remote control with a range over 30 meters, equipped with manual buttons as well. The control system operates normally at temperatures between -10℃ and 40℃ and relative humidity ≤ 85%.

Section II: Product Advantages

1. Door Panel: The door consists of a color steel composite door panel, available in two thickness options of 40mm/50mm. The inner and outer steel plate thickness is 0.45mm, filled with high-density polyurethane foam material, protected with a film, and internally reinforced with ribs. It features double-sided strips for a luxurious and generous appearance. Each door panel has evenly spaced grooves on the inner wall to enhance the door's impact resistance.

2. Filling: Intermediate filling with 45kg/m³ of non-fluorinated polyurethane foam material, internally reinforced with steel bands, providing excellent thermal insulation, heat insulation, electrical insulation, and soundproofing effects.

3. The surface steel plate junctions are firmly sealed without any gaps, ensuring the overall strength and reliability of the door panel.

4. Edging: The two end surfaces of the door panel are sealed with painted hot-dipped galvanized steel, sturdy and durable, with hinges securely fastened to the edging for added strength.

5. Sealing: Each door is equipped with top, bottom, and sealing strips, and there are also sealing strips at the junction of the track and door panel, ensuring an excellent sealing effect.

6. Balance System: The overhead door is balanced by high-tension springs, which have a lifespan of 100,000 cycles. All spring surfaces are electroplated for enhanced corrosion resistance. The torsion spring material is 60SI2Mn, and different models of torsion springs are selected based on the door size and lifting method. Good torsion springs can effectively balance the door's own weight, allowing the door to stop at any position without the motor, reducing the motor's stress and extending its service life (high-quality torsion springs enable the sliding door to open and close smoothly with minimal pulling force from the motor).

7. External Handle: The door bottom is equipped with an aesthetically pleasing built-in handle for easy manual opening.

8. Small Door: An optional pedestrian door can be installed in the main door for pedestrian safety.

9. Door with Small Window: Double-layer transparent insulating organic glass window, sealed and fixed with double-sided sealing strips between the frame and the organic glass. Rubber frame (optional).

10. Tracks: Made of hot-dipped galvanized steel plate, with passivation treatment for high corrosion resistance; aesthetically pleasing, strong, and not prone to deformation; ensures smooth operation of the sliding door along the fixed track.

11. Wheel: Accompanied by steel roller (distinguishing from ordinary plastic roller), sturdy and durable.

12. Guide Rails: To reinforce the door body strength and ensure the installation strength of the sliding door guide rail, prevent rail deformation, and make the door body sturdy and durable; during the installation of large-scale lifting industrial doors, steel auxiliary rails are installed on both sides of the doorway (encasing the rail within the auxiliary rail for fixation). These auxiliary rails are made of cold-rolled steel, which can moderately guarantee the door body's sturdiness.

Section 3: Composition of Safety Protection Devices

Wire Rope Break Prevention and Torsion Spring Break Prevention Device

Anti-fall device; in case of accidental breakage of the torsion spring or wire rope under any circumstances, the anti-breakage safety bracket for the wire rope automatically opens to prevent the door from falling; reaction time of 0.1 second; the door will stop within a range of 10 cm.

2. Safety Protection Device

The door reverses upward upon detection of a person or object passing through during closing, serving as a protective mechanism. Reaction time: 0.1 seconds. The safety device will continue to reverse the door until it reaches the fully open position.

Safety devices comply with EN 12453:2000 and EN 12445:2000 standards.

 

Four. Basic Components of Industrial Rising Doors

1. Transmission System: Composed of industrial door motor, drive shaft, balancing system, wire rope, wire rope wheel, etc.

2. Door System: Comprised of door panels, auxiliary tracks, straight tracks, curved tracks, small windows, small doors, hardware accessories, etc.

3. Operating System: Composed of components such as the control box, remote controller, etc.

4. Safety System: Composed of wire rope anti-breakage devices, torsion spring anti-breakage devices, photoelectric automatic control devices, etc.


1. Fixed Track 2. Auxiliary Track 3. Cross Track 4. Cross Track Fixed Angle Iron 5. Side Seal Strip 6. Solid Axle

7. Coupling 8. Bearing housing 9. Winding wheel 10. Torsion spring 11. Torsion spring break prevention device 12. Fixed end torsion spring housing 13. Retaining end torsion spring housing 14. Industrial door motor 15. Control box 16. Buffer 17. Roller 18. Top roller bracket 19. Top door panel 20. Skylight 21. Middle door panel 22. Side hinge 23. Bottom door panel 24. Handle 25. Bottom seal strip aluminum bracket 26. Bottom seal strip 27. Bottom wheel 28. Wire rope 29. Wire rope break prevention device 30. Bottom door panel end cap 31. Vent window 32. Middle door panel end cap 33. Top door panel edge seal 34. Top seal strip 35. Top seal strip bracket 36. "7" angle iron 37. Center hinge 38. Manual chain

Illustration of Three Industrial Sliding Door Installation Methods

One, High Position Lifting

Section 2: Vertical Advancement

III. Standard Enhancement

JadeDoor Enhances Door Production Line



Enhance door hardware and door panels