详情描述

Detailed Description

I. Product Performance Description

1. Our industrial sliding doors are primarily used for exterior and interior doors in warehouses, garages, factories, and airport terminals.

2. Features include smooth operation, low noise, heat preservation, wind and dust resistance, and corrosion resistance.

3. Life Span: The normal lifespan of industrial sliding doors is not less than 200,000 cycles.

4. Wind Pressure Resistance: The wind pressure resistance of industrial sliding doors is not less than 750Pa. Special performance can be enhanced according to requirements.

5. Insulation Performance: Insulation performance not less than level 6 as specified in GB/T8484-2002 "Classification and Testing Methods for Insulation Performance of External Windows of Buildings."

6. Open/Close Control: The control device is sensitive and lightweight. The opening/closing speed is 10-15m/min, with noise level below 65dB. In the event of a power outage, manual opening/closing is used, with an action force under 100N.

7. Operating Voltage: AC 220V/380V, Power: 0.75kW/1.5kW/2.2kW.

8. Control System Performance: Optional wireless remote control with an effective range over 30 meters, featuring a manual button as well. The control system operates normally under -10℃ to 40℃ temperatures and relative humidity ≤ 85%.

II. Product Advantages

1. Door Panel: The door is made of a color steel composite panel, available in two thickness options of 40mm/50mm. The inner and outer steel plate thickness is 0.45mm, filled with high-density polyurethane foam, protected with a film, and internally reinforced with ribs. It features double-sided strips for a luxurious and generous appearance. Each door panel inner wall has evenly spaced grooves to enhance the door's impact resistance.

2. Filling: Intermediate filling with 45kg/m³ of non-fluorinated polyurethane foam material, internally reinforced with steel bands, offering excellent thermal insulation, heat preservation, insulation, and soundproofing effects.

3. The surface steel plate joints are firmly sealed without any gaps, ensuring the overall strength and reliability of the door panel.

4. Edging: The two end surfaces of the door panels are sealed with painted hot-dipped galvanized steel, sturdy and durable. The hinges are securely fastened to the edging, enhancing the overall strength.

5. Sealing: All doors are equipped with top, bottom, and sealing strips, as well as sealing strips at the junction of the track and door panel, ensuring excellent sealing performance.

6. Balancing System: The overhead door is balanced by high-tensile springs, which have a lifespan of 100,000 cycles. All spring surfaces are electroplated for enhanced corrosion resistance. The torsion spring material is 60SI2Mn. Different types of torsion springs are chosen based on the door size and lifting method. A well-designed torsion spring can effectively balance the door's own weight, allowing the door to stop at any position without the motor, reducing the motor's load and extending its service life (high-quality torsion springs enable the sliding door to move freely with minimal pulling force from the motor).

7. External Handle: The door bottom features an aesthetically pleasing built-in handle for easy manual opening.

8. Small Gate: An optional pedestrian passage can be set within the door to ensure pedestrian safety.

9. Door with Small Window: Double-layer transparent insulating organic glass window, sealed and fixed with double-sided sealing strips between the window frame and the organic glass. Rubber frame (optional).

10. Rails: Made of hot-dipped galvanized steel plates, passivated treatment for high corrosion resistance; aesthetically pleasing, strong, and not easily deformed; ensures smooth operation of the sliding door along the fixed track.

11. Wheel: Accompanied by steel roller (distinguishing from ordinary plastic roller), sturdy and durable.

12. Guide Rail: To reinforce the door's strength and ensure the installation integrity of the sliding door track, prevent track deformation, and make the door sturdy and durable, steel auxiliary tracks are installed on both sides of the door opening (encasing the track within the auxiliary track and securing it) when installing large overhead industrial doors. These auxiliary tracks are made of cold-rolled steel and can moderately guarantee the door's strength.

Section 3: Composition of Safety Protection Devices

1. Wire Rope Anti-Breakage and Spring Anti-Breakage Device

Anti-fall device, in any event of accidental breakage of the torsion spring or wire rope, the anti-breakage safety bracket for wire rope automatically opens to prevent the door from falling, with a reaction time of 0.1 seconds; the door will stop within a range of 10 cm.

2. Safety Protection Device

The door reverses and bounces upwards if someone or something passes through during the closing process, activated by the safety device for protective purposes. Reaction time is 0.1 seconds. The safety device will continue to reverse the door until it reaches the fully open position.

Safety devices comply with EN 12453:2000 and EN 12445:2000 standards.

 

Section 4: Basic Components of Industrial Sliding Doors

1. Drive System: Composed of industrial door motor, drive shaft, balancing system, wire rope, wire rope wheel, etc.

2. Door System: Comprised of door panels, auxiliary tracks, straight tracks, curved tracks, small windows, small doors, hardware accessories, etc.

3. Operating System: Comprises of control box, remote controller, and other components.

4. Safety System: Composed of wire rope anti-breakage device, torsion spring anti-breakage device, photoelectric automatic control device, etc.


1. Track Mounting 2. Auxiliary Track 3. Cross Track 4. Cross Track Fixed Angle Iron 5. Side Seal Strip 6. Solid Shaft

7. Coupling 8. Bearing housing 9. Winding wheel 10. Torsion spring 11. Torsion spring break prevention device 12. Fixed end torsion spring housing 13. Tension spring end torsion spring housing 14. Industrial door motor 15. Control box 16. Buffer 17. Roller 18. Top roller bracket 19. Top door panel 20. Lightwell 21. Middle door panel 22. Side hinge 23. Bottom door panel 24. Handle 25. Bottom seal strip aluminum bracket 26. Bottom seal strip 27. Bottom roller 28. Steel wire rope 29. Steel wire rope break prevention device 30. Bottom door panel cap 31. Ventilation window 32. Middle door panel cap 33. Top door panel edge seal 34. Top seal strip 35. Top seal strip bracket 36. 7-groove angle iron 37. Center hinge 38. Manual chain

Three Installation Methods of Industrial Sliding Doors Diagram:

One, high-position lifting

Vertical Enhancement

III. Standard Enhancement

Jade Door Manufacturing Line Upgrades



Enhance door hardware and panels