What to Consider When Installing Outdoor Fitness Equipment?

Outdoor Fitness Equipment Installation Matters:

　　1The equipment pile embedded in the ground should be reliably fixed to the support plate or horizontal support.;

　　2The horizontal dimensions of the concrete foundation trenches for the supporting pillars of outdoor fitness equipment should be greater than or equal to.400Millimeter*400Millimeters, and the concrete foundation should not be shaped as smaller at the bottom and larger at the top.;

　　3The concrete used for the foundation of the casting equipment should have a higher strength.C20And there should be a designated person in charge before the foundation has set.;

　　4Equipment pillar embedded in the ground: when the height above ground of the equipment2000No Chinese content provided. Please provide the text to be translated.500Millimeter;Height above ground of equipment1000Millimeters and2000Within a millimeter, it should be greater than or equal to400Millimeter;Height above ground level of equipment1000Please provide the Chinese content that needs to be translated into American English.300Millimeter;Equipment uprights should extend below the base by more than or equal to100Millimeter-thick concrete support layer;

　　5After the outdoor fitness equipment is installed, the installation ground should be perpendicular to all supporting columns and bodies. The perpendicularity tolerance should not exceed...1/100;

　　6The soil for installing outdoor fitness equipment, at ground level800Within a millimeter, the fastening coefficient should not be less than0.7No Chinese content provided.ⅡClaypan soils and harder, non-sandy loams, as well as non-erodible geological structures.;Otherwise, equipment installation can only be carried out after the soil has been effectively treated.;

　　7Apologies, but there is no Chinese content provided for translation. Please provide the text to be translated.0.5The ground within a rice field should be treated with hardening measures, such as concrete hardening or brick paving after compacted soil.;Equipment foundations and the hardened surfaces surrounding them should be lower than the ground around the installed equipment.