详情描述

Product Overview/Introduction


Scope of Application


This series of hydraulic press is widely applicable for punching, embossing, forming, riveting, bending, cutting, and stretching of various materials. It is also used for the assembly and installation of various small components, serving as a versatile stamping machine. It utilizes an advanced mother-child cylinder hydraulic circuit, ensuring low noise, speed, and power consumption.


Product Introduction:


Equipment Voltage: 380V, Frequency: 50HZ, Motor Power: 2.2KW

2. The CNC hydraulic press machine can achieve: when the parts are placed in the fixture position and the inspection position, proximity switches detect them.

3. Product Force Displacement Monitoring: Perform force displacement detection during the product assembly process

4. The hydraulic press is capable of data storage and output, allowing it to save and directly output force displacement detection data generated during the product press-fitting process, as well as to perform network communication.

5. The hydraulic press can be customized to meet the customer's output requirements.


Equipment precision


The overall force measurement accuracy of the equipment is 0.05% of full scale, with a small display unit of 1N; (measured directly using a force sensor)

2. The displacement sensor has a small display unit of 0.01MM and a large error of ±0.015% of full scale. The repeat positioning accuracy is within ±0.05 MM.

3. The system has an AD sampling rate of 2000 times per second for force sensors.

4. Oversize Inspection (comparing upper and lower limits with a force set at 5 predetermined positions)

5. Plot the force-displacement curve with the X-axis representing displacement and the Y-axis representing force.

6. Data from the press can be saved in Excel format.

7. Stores 20 sets of configuration parameters, 8 different device actions.

8. Parallel accuracy between the upper and lower worktable surfaces is within 0.10MM.

9. After the rack and worktop are assembled, the rigidity at the equipment opening is not less than 200 KN/MM.

10. Equipment operates continuously for 24 hours with a temperature rise not exceeding 20°C. At an ambient temperature of 40°C, the oil temperature will not exceed 65°C.