Fuji Film Apeos 2450S Error Code 12

010-397 (05h) Heat Roll P Winding Fail - Refer to BSD: CH10.3. The failure is detected by the monitoring values of the Thermistor in the Fusing Unit and the NC Sensor, indicating that there is a paper roll attached to the Heat Roll. Note: Code 010-397 has a sub-code, Code: 0000000Xh (X = alphanumeric character), which is displayed along with the fail information. Different handling measures should be taken based on the different codes. Be sure to check the sub-code (0Xh) and take appropriate action. Causes/Actions: 1. Remove the jammed paper. 2. After clearing the records in NVM, lease the copier, turn off/turn on the power. 3. Check if non-standard paper is being used. If no issues are found, replace the Fusing Unit. (PL 7.1) After replacement, enter CE mode, lease copiers in Shaping Bay District, and perform Initialize in Printer Diag > Parameter > Life > Fusing Unit Print Count and Fusing Unit Time Count to initialize the maintenance counter.

Fuji Film Apeos 2450S Error Code 60

024-371 IOT-ESS Communication Fail Refer to BSD: CH3.1 for details on communication failure between IOT and ESS. Causes/Actions: 1. Power off/on. 2. Installed F/W. 3. Power off, check for wire breaks, shorts, or poor contacts between ESS PWB J6 and Drive PWB J1. 4. If no issues found, replace the following components in sequence for a copier equipment rental. ? Drive PWB (PL 18.2)? ESS PWB (PL 18.2) 024-950 Tray 1 No Paper Refer to BSD: - for explanation. Causes/Actions: Check the following items. ? Is the paper size placed correctly? ? Are you using paper of a different specification? ? Is the tray size guide rod defective? ? Is the Tray 1 Size Sensor (Analog Input[071-200]/Digital Input[071-104]) malfunctioning? (PL 9.1) If no issues found, replace the following components in sequence. ? Drive PWB (PL 18.2)? ESS PWB (PL 18.2)

1.1.2 Handling Precautions 1. Handle customer electronic information, such as copied/printed/faxed samples (paper information) and Log files (communication management reports, etc.). Obtain customer permission to take samples for investigation/analysis, and inform them that the information will not be used for other purposes. When the customer requests a submission application, use [Company's Information Security Regulations: Attachment 15 [Information, Storage Information/Personal Information Management Form (IS-040e)]] or obtain customer understanding in writing as per the customer's instructions. 2. Handling of stored PWB/eMMC, etc. The quick-dial number for faxes, the URL of customer registration on the device, etc., are important customer information stored internally within the PWB/eMMC, etc. Pay full attention when using them. (1) When replacing, transfer the information to the new PWB/eMMC and clear the information before disposal to ensure no disclosure of customer's important information. (Details are recorded in Chapter 4, Preface to Chapter 5) (2) For replaced parts, if the part is not the cause of the fault, it must be returned to the original position on the machine. (Parts temporarily installed/removed for fault diagnosis should have their relevant information cleared during diagnosis.) 3. Changes to NVM values related to safety during maintenance. After setting and testing related NVMs such as polling, they must be restored. (For example, refer to the common FTO 2-202 for polling details for each model.) 4. During repairs, if the company's equipment needs to be connected to the client's network, prior permission from the client's system administrator (or responsible person) must be obtained through the responsible person. 5. Other Handling Precautions In addition to the above items 1 to 4, there are other handling precautions to be aware of. Follow the "Do it now! Do it together!" issued by the Maintenance General Department's TS General G to ensure asset safety and avoid disclosure.

Shapingba Copy Machine Rental - Copy Machine Rental - Gephi to Perfection (Recommended Supplier) provided by Chongqing Gephi to Perfection Technology Co., Ltd. Chongqing Gephi to Perfection Technology Co., Ltd. offers services such as "Fujifilm copier sales and rentals, computer and office equipment sales and repair services," and specializes in the manufacturing equipment for electronic, electrical products, and other industries. The company has brands like "Fujifilm, Lexmark, Huawei Conference Screen, Great Wall Computer, Unisplendour Computer, and Hikvision Computer." It has a good reputation at Unit 18-6, Building B, Yu Gao Plaza, 65 Keqiao Road, Jiulongpo District, Chongqing. Please call for inquiries, contact: Tang Manager.