详情描述
I. Overview:
YAB SeriesLiquid anPumps are newly developed products by our company, based on the analysis and research of similar overseas products, primarily used for conveying.Liquid anan water, dimethylammonium epoxideYiwan、lvJia WanButadiene and other similar volatile liquids, widely used in gas, oil, chemical, metallurgy, and other fields, this pump's seal rings and vanes are made with foreign formulas, boasting high corrosiveness, toughness, and strength. The pump housing is made of high-density cast iron alloy, which is highly polished after processing, ensuring the non-leakage of the liquid. The pump's features include excellent sealing, high and stable pressure.
Section 2: Model Significance: YAB※-5 Type
Model Meaning: YAB—Liquid anPump - Pressure Range (Inlet/Outlet Pressure Difference) ※ - Pump's Rated Flow
III. Working Principle:
This pump type is a volumetric impeller pump, which operates through the centrifugal sliding of the blades. The flow rate is related to the shaft speed. The stator inner surface is formed using a composite curve. The stator, rotor, baffles, and blades together form ten sealed cavities. Due to the stator surface being a composite curve, as the rotor rotates, the volume of the inlet cavity gradually increases, creating a vacuum and suction to draw in the fluid. After the rotor rotates a certain angle, the volume section gradually decreases, thus expelling the fluid. Between the suction and pressure oil cavities, there is a sealing block that separates the oil cavities. The blades are tightly fitted to the stator inner surface due to centrifugal force and the two baffle structures, allowing the pump to operate normally under rated conditions.
