The Bosheng KT-10 steel blackening liquid at room temperature is a new-generation room temperature blackening product developed by Dr. Tian Kang, a surface technology expert from Bosheng Company based in the United States, through the integration of new achievements in blackening technology from both domestic and international sources. Its appearance is:LilacIt differs in color, as well.BlueOur traditional room temperature blackening solution, which boasts outstanding quality advantages. Compared to traditional room temperature blackening products, our BoSheng brand blackening solution has the following characteristics:
Adhesive Strength: The blackened workpieces treated with our product are free of any floating black particles and have a dense film layer. Through repeated testing, the surface of the blackened workpieces, when tested with experimental filter paper, withstands 500 or more cycles of wiping without revealing the metallic substrate. In contrast, traditional room-temperature blackening products struggle to exceed 100 cycles.
2. Strong Corrosion Resistance: The blackened workpieces treated by this process can withstand salt spray tests for up to 10 hours, while traditional blackening methods at room temperature rarely exceed 3 hours. In the sulfur copper corrosion resistance test, the national standard for passing is 30 seconds. Our products typically achieve 50 to 200 seconds, demonstrating strong corrosion resistance.
3. Minimal Sludge, Ultra-High Processing Capacity: The traditional room temperature blackening liquid commonly suffers from severe sedimentation or post-sedimentation, resulting in a loss of up to 40%-65% of its active ingredients and low efficiency. The Boseng brand room temperature blackening liquid has minimal sludge (just one-fifth of traditional room temperature steel blackening liquid), no post-sedimentation, and high efficiency. The blackening area per kilogram of product can reach 18-22 square meters (traditional room temperature blackening liquids typically range from 3-7 square meters, with a few exceptions capable of handling up to 9 square meters), thereby offering users a higher cost-performance ratio and reducing production costs.
4. Wide Adaptability: Achieves pure coloration, dense film layers, and free of floating black on various steels, including high-carbon, low-carbon, and even difficult-to-process high-temperature blackened steels such as cast iron, 40 Chrome, silicon steel, and powder metallurgy.
5. Wide Time Range for Easy Operation: Traditional at-room-temperature blackening products have strict operation time limits, as extended blackening time can lead to floating blackening or even loose and scrapped products. This is due to the insufficiently dense blackening film and poor adhesion, allowing the blackening liquid to penetrate the formed film and continue to react with the metal substrate, thereby damaging the film layer. However, even after soaking the workpiece in our Bosheng brand blackening liquid for half an hour, no floating blackening or film layer loosening has been observed.
