Qinhuangdao Bonny Technology Co., Ltd. is a manufacturer of anti-corrosion coatings and epoxy floor paints. Our Yinkai epoxy floor paint is a high-value, high-quality, and high-demand product. Therefore, today we provide you with the correct usage and application suggestions for the West epoxy floor paint:
1. After the flat land construction is completed, it requires 7-10 days of maintenance before it can be put into use. During the maintenance period, it is essential to avoid the surface from being soaked by water or any other solution.
Employees must change into non-slip soled shoes (not foam-bottomed black shoes) upon entering the workshop (to prevent bringing in outside mud and sand that could scratch the floor).
All hardware items, such as iron chairs, iron tables, and iron shelves, must have their legs wrapped with soft plastic, rubber, or padded with cardboard to prevent scratching the floor during use.
4. Ensure the machine plate is fully elevated off the ground when lifting the drawbar. Pay special attention to the corner of the plate during turns to avoid scraping the ground.
5. When cleaning the floor, please use a soft, absorbent mop or a wet/dry vacuum cleaner. It can be cleaned with water or cleaning agents. However, please be cautious of the slippery surface.
If wear or scratches occur due to extended use, minor areas can be locally repaired. For larger areas, it is recommended to repaint the surface entirely.
7. Prior to the equipment's arrival, lay cardboard boxes on the ground level to prevent any scratches during transportation.
8. For wheelbarrows and hand trucks, please use rigid or elastic tires, and separate their use indoors and outdoors in the factory.
9. Can be waxed according to ground specifications (which can prevent ground scratching).