Manufacturer of customized zeolite wheel catalytic combustion units for paint spray waste gas treatment

Catalytic Combustion Equipment

Catalytic combustion technology refers to the process of rapidly oxidizing hydrocarbons in organic waste gases to water and carbon dioxide under lower temperatures with the assistance of a catalyst, achieving the goal of waste treatment. The catalytic combustion method for treating industrial organic waste gases has been widely applied in sectors such as paint, rubber processing, plastic processing, resin processing, leather processing, the food industry, and foundry, as well as in auto-exhaust purification. The catalytic combustion treatment method has been used to control organic waste gases emitted from varnished wire drying furnaces, and has subsequently been researched in areas such as insulating materials and the printing industry, leading to the extensive application of catalytic combustion equipment.

Zeolite Wheel Catalytic Combustion

Zeolite Wheel Equipment Zeolite Rotating Wheel+coAll-in-one unit

Concentrated Rotating Disk Absorber System for Adsorbing High Volume Low Concentration Volatile Organic Compounds(VOCs)After desorption, introduce the low-volume, high-concentration waste gas into the incinerator for decomposition and purification. For high-volume, low-concentration waste gas,VOCs Waste gas,Through a wheel with zeolite as the adsorption material, VOCs The purified gas, which has been adsorbed by zeolite in the adsorption zone of the rotating wheel, is then released into the atmosphere through the chimney.,Further in another desorption zone, using180℃～230℃Small quantity of hot air. Please provide the Chinese content to be translated.VOCs The desorption process is carried out. Such a desorption gas with high concentration and low airflow is then introduced into the incinerator for decomposition into carbon dioxide and water vapor.,Purified gas after15Cement chimney meets emission standards.

This concentrated process significantly reduces fuel costs; the system is one of the technologies that save operation costs by handling high airflow and low-concentration organic waste gases. The process waste gases are removed of paint mist dust and granular pollutants through a preliminary filter screen, and then adsorbed by a concentration wheel containing hydrophobic zeolite.VOCsThe clean air is released back into the atmosphere after being treated. Due to the slow rotation of the wheel, it passes through the desorption zone, where it is desorbed by a small amount of high-temperature desorption air. The high-concentration waste gas desorbed is then introduced into a small incinerator or catalytic incinerator.VOCs The desorption process equipment is fitted with a secondary compensation heater to supply desorption hot air, aiming to save energy.

Zhongxin Industry offers a variety of paint finishing cost management solutions. Welcome to inquire.