详情描述

Non-vibration anti-slip walkway flooring coating system 

Construction Thickness:3mm-5.0mm 

Service Life:15+ years

Performance Features:The flooring surface displays quartz sand particles, offering varying anti-slip effects based on the mesh size of the quartz sand. The ground is resistant to impacts, compressions, and wear, with durable oil污 resistance, enhancing 40% in anti-slip performance.

Application Range: Designed for the ground surfaces of parking lot vehicle entrance and exit ramps, as well as areas requiring anti-slip properties.


Technical Specifications

Drying Time (25°C): Surface dry in 12h; Fully dry in 24h

Abrasion resistance: 750g/ 500 rotations ≤ 0.02g    Alkaline resistance: 20% NaOH: 30 days - Good

Acid Resistance: 20% H2SO4 - 30 days, Good; Salt Resistance: 30% NaCl - 30 days, Good.

Compressive Strength: ≥90 Mpa, Hardness: Pencil Hardness: ≥5H

Impact resistance: ≥ 90 kg/m² Environmental friendliness: Non-toxic, odorless, and pollution-free after film formation


Construction Technique

Polish and clean the floor

B. Roll Coating Epoxy Primer

C. Scrape off the epoxy mortar layer and uniformly sprinkle sand for anti-slip traction

D. After the surface has cured, sweep off the anti-slip sand

Epoxy Coating Abrasion-Resistant Topcoat